View PENTIUMIIICPU_2905500.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz datasheet product features the pentium ? iii processor is designed for high-performance desktops and for workstations and servers. it is binary compatible with previous intel architecture processors. the pentium ? iii processor provides great performance for applications running on advanced operating systems such as windows* 98, windows nt and unix*. this is achieved by integrating the best attributes of intel processorsthe dynamic execution, dual independent bus architecture plus intel mmx? technology and internet streaming simd extensionsbringing a new level of performance for systems buyers. the pentium ? iii processor is scaleable to two processors in a multiprocessor system and extends the power of the pentium ? ii processor with performance headroom for business media, communication and internet capabilities. systems based on pentium ? iii processors also include the latest features to simplify system management and lower the cost of ownership for large and small business environments. the pentium ? iii processor offers great performance for todays and tomorrows applications. sc242 / secc2 package n available in 1.0b ghz, 933, 866, 800eb, 733, 667, 600b, 600eb, 533b, and 533eb mhz speeds support a 133 mhz system bus (b denotes support for a 133 mhz system bus where a processor is available at the same specific core frequency in seperate 100 mhz and 133 mhz front side bus versions; e denotes support for advanced transfer cache and advanced system buffering) n available in 850, 800, 750, 700, 650, 600e, 600, 550e, 550, 500, and 450 mhz speeds support a 100 mhz system bus (e denotes support for advanced transfer cache and advanced system buffering) n available in versions that incorporate 256 kb advanced transfer cache (on-die, full speed level 2 (l2) cache with error correcting code (ecc)) or versions that incorporate a discrete, half-speed, 512 kb in-package l2 cache with ecc n dual independent bus (dib) architecture increases bandwidth and performance over single-bus processors n internet streaming simd extensions for enhanced video, sound and 3d performance n binary compatible with applications running on previous members of the intel microprocessor line n dynamic execution micro architecture n power management capabilities system management mode multiple low-power states n intel processor serial number n optimized for 32-bit applications running on advanced 32-bit operating systems n single edge contact cartridge (s.e.c.c.) and s.e.c.c.2 packaging technology; the s.e.c. cartridges deliver high performance with improved handling protection and socketability n integrated high performance 16 kb instruction and 16 kb data, nonblocking, level one cache n enables systems which are scaleable up to two processors n error-correcting code for system bus data may 2000 order number: 244452-007
datasheet information in this document is provided in connection with intel products. no license, express or implied, by estoppel or othe rwise, to any intellectual property rights is granted by this document. except as provided in intel's terms and conditions of sale for such products, inte l assumes no liability whatsoever, and intel disclaims any express or implied warranty, relating to sale and/or use of intel products including liabil ity or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property righ t. intel products are not intended for use in medical, life saving, or life sustaining applications. designers must not rely on the absence or characteristics of any features or instructions marked reserved or undefined. int el reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. intel may make changes to specifications and product descriptions at any time, without notice. the pentium ? iii processor may contain design defects or errors known as errata which may cause the product to deviate from published specifications. current characterized errata are available on request. contact your local intel sales office or your distributor to obtain the latest specifications and before placing your product o rder. copies of documents which have an ordering number and are referenced in this document, or other intel literature may be obtaine d by calling 1-800- 548-4725 or by visiting intel's website at http://www.intel.com. copyright ? intel corporation, 2000 *third-party brands and names are the property of their respective owners.
datasheet 3 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz contents 1.0 introduction................................................................................................................ ......... 9 1.1 terminology.........................................................................................................10 1.1.1 s.e.c.c.2 and s.e.c.c. packaged processor terminology ..................10 1.1.2 processor naming convention...............................................................11 1.2 related documents.............................................................................................12 2.0 electrical specifications................................................................................................... .13 2.1 processor system bus and v ref ........................................................................13 2.2 clock control and low power states..................................................................14 2.2.1 normal statestate 1 ...........................................................................15 2.2.2 autohalt powerdown statestate 2...................................................15 2.2.3 stop-grant statestate 3 .....................................................................15 2.2.4 halt/grant snoop statestate 4 ........................................................16 2.2.5 sleep statestate 5..............................................................................16 2.2.6 deep sleep statestate 6 ....................................................................16 2.2.7 clock control..........................................................................................17 2.3 power and ground pins ......................................................................................17 2.4 decoupling guidelines ........................................................................................17 2.4.1 processor vcc core decoupling............................................................18 2.4.2 processor system bus agtl+ decoupling............................................18 2.5 processor system bus clock and processor clocking .......................................18 2.6 voltage identification ...........................................................................................18 2.7 processor system bus unused pins...................................................................20 2.8 processor system bus signal groups ................................................................20 2.8.1 asynchronous vs. synchronous for system bus signals .......................21 2.8.2 system bus frequency select signal (bsel0)......................................22 2.9 test access port (tap) connection....................................................................23 2.10 maximum ratings................................................................................................24 2.11 processor dc specifications...............................................................................25 2.12 agtl+ system bus specifications .....................................................................30 2.13 system bus ac specifications ............................................................................30 3.0 signal quality specifications ............................................................................................39 3.1 bclk, picclk, and pwrgood signal quality specifications and measurement guidelines ....................................................................................39 3.2 agtl+ and non-agtl+ overshoot/undershoot specifications and measurement guidelines ....................................................................................40 3.2.1 overshoot/undershoot magnitude .........................................................40 3.2.2 overshoot/undershoot pulse duration...................................................41 3.2.3 overshoot/undershoot activity factor....................................................41 3.2.4 reading overshoot/undershoot specification tables............................42 3.2.5 determining if a system meets the overshoot/undershoot specifications .........................................................................................43 3.3 agtl+ and non-agtl+ ringback specifications and measurement guidelines ....................................................................................45 3.3.1 settling limit guideline...........................................................................47
pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 4 datasheet 4.0 thermal specifications and design considerations......................................................... 48 4.1 thermal specifications........................................................................................ 49 4.1.1 thermal diode........................................................................................ 52 5.0 s.e.c.c. and s.e.c.c.2 mechanical specifications......................................................... 53 5.1 s.e.c.c. mechanical specifications.................................................................... 53 5.2 s.e.c.c.2 mechanical specification.................................................................... 60 5.3 s.e.c.c.2 structural mechanical specification ................................................... 66 5.4 processor package materials information .......................................................... 68 5.5 intel ? pentium ? iii processor signal listing........................................................ 68 5.6 intel ? pentium ? iii processor core pad to substrate via assignments .............. 77 5.6.1 processor core pad via assignments (cpuid 067xh).......................... 77 5.6.2 processor core signal assignments (cpuid 067xh) ............................ 77 5.6.3 processor core pad via assignments (cpuid 068xh).......................... 88 6.0 boxed processor specifications....................................................................................... 89 6.1 introduction ......................................................................................................... 89 6.2 fan heatsink mechanical specifications............................................................. 89 6.2.1 boxed processor fan heatsink dimensions .......................................... 89 6.2.2 boxed processor fan heatsink weight.................................................. 91 6.2.3 boxed processor retention mechanism ................................................ 91 6.3 fan heatsink electrical requirements ............................................................... 92 6.3.1 fan heatsink power supply ................................................................... 92 6.4 fan heatsink thermal specifications.................................................................. 93 6.4.1 boxed processor cooling requirements ............................................... 93 7.0 intel ? pentium ? iii processor signal description ............................................................. 94 7.1 alphabetical signals reference .......................................................................... 94 7.2 signal summaries ............................................................................................. 101
datasheet 5 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figures 1 second level (l2) cache implementation ........................................................... 9 2 agtl+ bus topology ..........................................................................................14 3 stop clock state machine ...................................................................................14 4 bsel[1:0] example for a 100 mhz system design (100 mhz processor installed) ............................................................................22 5 bsel[1:0] example for a 100/133 mhz capable system (100 mhz processor installed) ............................................................................23 6 bsel[1:0] example for a 100/133 mhz capable system (133 mhz processor installed) ............................................................................23 7 bclk, picclk, and tck generic clock waveform...........................................36 8 system bus valid delay timings ........................................................................36 9 system bus setup and hold timings..................................................................37 10 system bus reset and configuration timings....................................................37 11 power-on reset and configuration timings.......................................................37 12 test timings (tap connection) ..........................................................................38 13 test reset timings .............................................................................................38 14 bclk and picclk generic clock waveform .....................................................39 15 maximum acceptable agtl+ and non-agtl+ overshoot/undershoot waveform.......................................................................45 16 low to high agtl+ and non-agtl+ receiver ringback tolerance .................47 17 signal overshoot/undershoot, settling limit, and ringback 1............................47 18 s.e.c.cartridge 3-dimensional view..............................................................48 19 s.e.c.cartridge 2 substrate view ..................................................................49 20 processor functional die layout (cpuid 068xh) ...............................................51 21 s.e.c.c. packaged processor multiple views................................................53 22 s.e.c.c. packaged processor extended thermal plate side dimensions .................................................................................................54 23 s.e.c.c. packaged processor bottom view dimensions...............................54 24 s.e.c.c. packaged processor latch arm, extended thermal plate lug, and cover lug dimensions..................................................55 25 s.e.c.c. packaged processor latch arm, extended thermal plate, and cover detail dimensions (reference dimensions only) .....56 26 s.e.c.c. packaged processor extended thermal plate attachment detail dimensions ............................................................................57 27 s.e.c.c. packaged processor extended thermal plate attachment detail dimensions, continued .............................................................................58 28 s.e.c.c. packaged processor substrate edge finger contact dimensions .58 29 s.e.c.c. packaged processor substrate edge finger contact dimensions, detail a ...........................................................................................59 30 intel ? pentium? iii processor markings (s.e.c.c. packaged processor)...........59 31 s.e.c.c.2 packaged processor multiple views..............................................60 32 s.e.c.c.2 packaged processor assembly primary view ...............................61 33 s.e.c.c.2 packaged processor assembly cover view with dimensions ......61 34 s.e.c.c.2 packaged processor assembly heat sink attach boss section ...62 35 s.e.c.c.2 packaged processor assembly side view ....................................62 36 detail view of cover in the vicinity of the substrate attach features.................62 37 s.e.c.c.2 packaged processor substrate edge finger contact dimensions63 38 s.e.c.c.2 packaged processor substrate edge finger contact dimensions (detail a)..........................................................................................63
pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 6 datasheet 39 s.e.c.c.2 packaged processor substrate (cpuid 067xh) keep in zones ... 64 40 s.e.c.c.2 packaged processor substrate (cpuid 068xh) keep in zones ....................................................................... 64 41 s.e.c.c.2 packaged processor substrate (cpuid 067xh) keep-out zone...................................................................... 65 42 s.e.c.c.2 packaged processor substrate (cpuid 068xh) keep-out zone...................................................................... 65 43 intel ? pentium? iii processor markings (s.e.c.c.2 package) ........................... 66 44 substrate deflection away from heat sink ........................................................ 66 45 substrate deflection toward the heatsink.......................................................... 67 46 s.e.c.c.2 packaged processor specifications................................................... 67 47 processor core pad via assignments ................................................................ 77 48 intel ? pentium ? iii processor s.e.c.c. 2 via map .............................................. 88 49 boxed intel ? pentium ? iii processor in the s.e.c.c.2 packaging (fan power cable not shown) ........................................................................... 89 50 side view space requirements for the boxed processor with s.e.c.c.2 packaging ................................................................................... 90 51 front view space requirements for the boxed processor with s.e.c.c.2 packaging ................................................................................... 90 52 top view air space requirements for the boxed processor.............................. 91 53 boxed processor fan heatsink power cable connector description ................ 92 54 recommended baseboard power header placement relative to fan power connector and intel ? pentium ? iii processor ............................... 93
datasheet 7 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz tables 1 processor identification .......................................................................................11 2 related documents.............................................................................................12 3 voltage identification definition ...........................................................................19 4 system bus signal groups .................................................................................21 5 frequency select truth table for bsel[1:0].......................................................22 6 absolute maximum ratings (cpuid 067xh) .......................................................24 7 absolute maximum ratings (cpuid 068xh) .......................................................25 8 voltage and current specifications .....................................................................26 9 agtl+ signal groups dc specifications............................................................29 10 non-agtl+ signal group dc specifications .....................................................29 11 agtl+ bus specifications .................................................................................30 12 system bus ac specifications (clock) at processor core pins .........................31 13 valid system bus, core frequency, and cache bus frequencies ....................32 14 system bus ac specifications (agtl+ signal group) at the processor core pins ..........................................................................................32 15 system bus ac specifications (cmos signal group) at the processor core pins ....................................................................................34 16 system bus ac specifications (reset conditions) ............................................34 17 system bus ac specifications (apic clock and apic i/o) at the processor core pins ................................................................................34 18 system bus ac specifications (tap connection) at the processor core pins ..........................................................................................35 19 bclk, picclk, and pwrgood signal quality specifications at the processor core .................................................................39 20 100 mhz agtl+ signal group overshoot/undershoot tolerance ....................43 21 133 mhz agtl+ signal group overshoot/undershoot tolerance .....................44 22 33 mhz non-agtl+ signal group overshoot/undershoot tolerance ...............44 23 signal ringback specifications for signal simulation .........................................46 24 agtl+ and non-agtl+ signal groups ringback tolerance specifications .....46 25 thermal specifications for s.e.c.c. packaged processors ...............................49 26 thermal specifications for s.e.c.c.2 packaged processors..............................50 27 thermal diode parameters .................................................................................52 28 thermal diode interface......................................................................................52 29 description table for processor markings (s.e.c.c. packaged processor).......60 30 description table for processor markings (s.e.c.c.2 packaged processor) .....66 31 s.e.c.c.2 pressure specifications......................................................................67 32 s.e.c.c. materials...............................................................................................68 33 s.e.c.c.2 materials.............................................................................................68 34 signal listing in order by pin number ................................................................69 35 signal listing in order by signal name...............................................................73 36 via listing in order by signal name ...................................................................78 37 via listing in order by via location....................................................................83 38 boxed processor fan heatsink spatial dimensions ...........................................91 39 fan heatsink power and signal specifications...................................................92 40 baseboard fan power connector location ........................................................93 41 signal description ...............................................................................................94 42 output signals...................................................................................................101 43 input signals......................................................................................................101 44 input/output signals (single driver)..................................................................102
pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 8 datasheet 45 input/output signals (multiple driver) ............................................................... 102
datasheet 9 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 1.0 introduction the intel ? pentium ? iii processor is the next member of the p6 family, in the intel ia-32 processor line. like the intel ? pentium ? ii processor, the intel ? pentium ? iii processor implements the dynamic execution microarchitecture - a unique combination of multiple branch prediction, data flow analysis, and speculative execution. this enables these processors to deliver higher performance than the pentium processor, while maintaining binary compatibility with all previous intel architecture processors. the pentium iii processor also executes mmx? technology instructions for enhanced media and communication performance just as its predecessor, the pentium ii processor. the pentium iii processor executes internet streaming simd extensions for enhanced floating point and 3-d application performance. in addition, the pentium iii processor extends the concept of processor identification with the addition of a processor serial number. refer to the intel ? processor serial number application note (order number 245125 ) for more detailed information. the pentium iii processor utilizes multiple low-power states such as autohalt, stop-grant, sleep, and deep sleep to conserve power during idle times. the pentium iii processor utilizes the same multiprocessing system bus technology as the pentium ii processor. this allows for a higher level of performance for both uni-processor and two-way multiprocessor (2-way mp) systems. please see the pentium ? iii processor specification update (order number 244453) for guidelines on which processors can be mixed in an mp system. memory is cacheable for 4 gb of addressable memory space, allowing significant headroom for desktop systems. the pentium iii processor is available with two different second level (l2) cache implementations. the discrete cache version (cpuid 067xh) uses commercially available parts for the l2 cache. the l2 cache is composed of an external (to processor silicon) tagram and burst pipelined synchronous static ram (bsram), as seen in figure 1 . the advanced transfer cache (cpuid 068xh) does not use commercially available l2 cache parts. its l2 cache resides entirely within the processor silicon, as seen in figure 1 . refer to table 1 to determine the l2 cache implementation for each pentium iii processor. pentium iii processors are offered in either single edge contact cartridge (s.e.c.c.) or single edge contact cartridge 2 (s.e.c.c.2) package technologies. the s.e.c.c. package has the following features: an extended thermal plate, a cover, and a substrate with an edge finger connection. the extended thermal plate allows heatsink attachment or customized thermal solutions. the s.e.c.c.2 package has a cover and a substrate with an edge finger connection. this allows the thermal solutions to be placed directly onto the processor core package. the edge finger connection maintains socketability for system configuration. the edge finger connector is called the sc242 connector in this and other documentation. figure 1. second level (l2) cache implementation processor core tag l2 processor core l2 discrete cache advanced transfer cache
10 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 1.1 terminology in this document, a # symbol after a signal name refers to an active low signal. this means that a signal is in the active state (based on the name of the signal) when driven to a low level. for example, when flush# is low, a flush has been requested. when nmi is high, a nonmaskable interrupt has occurred. in the case of signals where the name does not imply an active state but describes part of a binary sequence (such as address or data ), the # symbol implies that the signal is inverted. for example, d[3:0] = hlhl refers to a hex a, and d[3:0]# = lhlh also refers to a hex a (h= high logic level, l= low logic level). the term system bus refers to the interface between the processor, system core logic (a.k.a. the agpset components), and other bus agents. the system bus is a multiprocessing interface to processors, memory, and i/o. the term cache bus refers to the interface between the processor and the l2 cache components (tagram and bsrams). the cache bus does not connect to the system bus, and is not visible to other agents on the system bus. 1.1.1 s.e.c.c.2 and s.e.c.c. packaged processor terminology the following terms are used often in this document and are explained here for clarification: ? pentium ? iii processor the entire product including internal components, substrate, cover and in s.e.c.c. packaged processors, an extended thermal plate. ? s.e.c.c. the processor package technology called single edge contact cartridge. ? s.e.c.c.2 the follow-on to s.e.c.c. processor package technology. this differs from its predecessor in that it has no extended thermal plate, thus reducing thermal resistance. ? processor substrate the fr4 board on which components are mounted inside the s.e.c.c. or s.e.c.c.2 packaged processor (with or without components attached). ? processor core the processors execution engine. ? extended thermal plate this s.e.c.c. package feature is the surface used to attach a heatsink or other thermal solution to the processor. ? cover the plastic casing that covers the backside of the substrate. ? latch arms an s.e.c.c. package feature which can be used as a means for securing the processor in a retention mechanism. ? olga - organic land grid array. this package technology permits attaching the heatsink directly to the die. additional terms referred to in this and other related documentation: ? sc242 the 242-contact slot connector (previously referred to as slot 1 connector) that the s.e.c.c. and s.e.c.c.2 plug into, just as the pentium ? pro processor uses socket 8. ? retention mechanism a mechanical piece which holds the s.e.c.c. or s.e.c.c.2 packaged processor in the sc242 connector. ? heatsink support the support pieces that are mounted on the baseboard to provide added support for heatsinks. ? keep-out zone the area on or near an s.e.c.c. or s.e.c.c.2 packaged processor substrate that systems designs can not utilize. ? keep-in zone the area of the center of an s.e.c.c. or s.e.c.c.2 packaged processor substrate that thermal solutions may utilize. the l2 cache, tagram and bsram die, are industry designated names.
datasheet 11 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 1.1.2 processor naming convention a letter(s) is added to certain processors (e.g., 600b mhz) when the core frequency alone may not uniquely identify the processor. below is a summary what the letter means as well as a table listing all pentium iii processors currently available. ? b 133 mhz system bus frequency ? e processor with advanced transfer cache (cpuid 068xh) notes: 1. refer to the pentium ? iii processor specification update for the exact cpuid for each processor. 2. atc = advanced transfer cache. atc is an l2 cache integrated on the same die as the processor core. with atc, the interface between the processor core and l2 cache is 256-bits wide, runs at the same frequency as the processor core and has enhanced buffering. table 1. processor identification processor core frequency (mhz) system bus frequency (mhz) l2 cache size (kbytes) l2 cache type cpuid 1 450 450 100 512 discrete 067xh 500 500 100 512 discrete 067xh 533b 533 133 512 discrete 067xh 533eb 533 133 256 atc 2 068xh 550 550 100 512 discrete 067xh 550e 550 100 256 atc 2 068xh 600 600 100 512 discrete 067xh 600b 600 133 512 discrete 067xh 600e 600 100 256 atc 2 068xh 600eb 600 133 256 atc 2 068xh 650 650 100 256 atc 2 068xh 667 667 133 256 atc 2 068xh 700 700 100 256 atc 2 068xh 733 733 133 256 atc 2 068xh 750 750 100 256 atc 2 068xh 800 800 100 256 atc 2 068xh 800eb 800 133 256 atc 2 068xh 850 850 100 256 atc 2 068xh 866 866 133 256 atc 2 068xh 933 933 133 256 atc 2 068xh 1.0b ghz 1000 133 256 atc 2 068xh
12 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 1.2 related documents the reader of this specification should also be familiar with material and concepts in the documents listed in table 2 . these documents, and a complete list of pentium iii processor reference material, can be found on the intel developers insight web site located at http://developer.intel.com. table 2. related documents document intel order number ap-485, intel ? processor identification and the cpuid instruction 241618 ap-585, pentium ? ii processor gtl+ guidelines 243330 ap-588, mechanical and assembly technology for s.e.c. cartridge processors 243333 ap-589, design for emi 243334 ap-826, mechanical assembly and customer manufacturing technology for s.e.p. packages 243748 ap-902, s.e.c.c.2 heatsink installation and removal 244454 ap-903, mechanical assembly and customer manufacturing technology for processor in s.e.c.c.2 packages 244457 ap-905, pentium ? iii processor thermal design guidelines 245087 ap-906, 100 mhz agtl+ layout guidelines for the pentium ? iii processor and intel ? 440bx agpset 245086 ap-907, pentium ? iii processor power distribution guidelines 245085 intel ? processor serial number 245119 ck97 clock synthesizer design guidelines 243867 intel ? architecture software developer's manual 243193 volume i: basic architecture 243190 volume ii: instruction set reference 243191 volume iii: system programming guide 243192 p6 family of processors hardware developers manual 244001 pentium ? ii processor at 350, 400 and 450 mhz datasheet 243657 pentium ? ii processor developers manual 243502 pentium ? iii processor i/o buffer models ? pentium ? iii processor specification update 244453 sc242 bus termination card design guidelines 243409 slot 1 connector specification 243397 vrm 8.2 dc-dc converter design guidelines 243773 ? these models are available in viewlogic* xtk* model format (formerly known as quad format) at the intel developers website at http://developer.intel.com.
datasheet 13 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 2.0 electrical specifications 2.1 processor system bus and v ref most intel ? pentium ? iii processor signals use a variation of the low voltage gunning transceiver logic (gtl) signaling technology. the pentium pro processor system bus specification is similar to the gtl specification, but was enhanced to provide larger noise margins and reduced ringing. the improvements are accomplished by increasing the termination voltage level and controlling the edge rates. this specification is different from the gtl specification, and is referred to as gtl+. for more information on gtl+ specifications, see the gtl+ buffer specification in the pentium ? ii processor developers manual (order number 243502). the pentium iii processor varies from the pentium pro processor in its output buffer implementation. the buffers that drive the system bus signals on the pentium iii processor are actively driven to v tt for one clock cycle after the low to high transition to improve rise times. these signals should still be considered open-drain and require termination to a supply that provides the high signal level. because this specification is different from the gtl+ specification, it is referred to as agtl+ in this and other documentation. agtl+ logic and gtl+ logic are compatible with each other and may both be used on the same system bus. for more information on agtl+ routing, see ap-906, 100 mhz agtl+ layout guidelines for the pentium iii ? processor and intel ? 440bx agpset (order number 245086) or the appropriate platform design guide. agtl+ inputs use differential receivers which require a reference signal (v ref ). v ref is used by the receivers to determine if a signal is a logical 0 or a logical 1, and is generated on the s.e.c.c. and s.e.c.c.2 packages for the processor core. local v ref copies should be generated on the baseboard for all other devices on the agtl+ system bus. termination (usually a resistor at each end of the signal trace) is used to pull the bus up to the high voltage level and to control reflections on the transmission line. the processor contains termination resistors that provide termination for one end of the pentium iii processor system bus. these specifications assume another resistor at the end of each signal trace to ensure adequate signal quality for the agtl+ signals; see table 11 for the bus termination voltage specifications for agtl+. refer to the pentium ? ii processor developers manual (order number 243502) for the gtl+ bus specification. solutions exist for single-ended termination as well, though this implementation changes system design. figure 2 is a schematic representation of agtl+ bus topology with pentium iii processors. the agtl+ bus depends on incident wave switching. therefore timing calculations for agtl+ signals are based on flight time as opposed to capacitive deratings. analog signal simulation of the pentium iii processor system bus including trace lengths is highly recommended when designing a system with a heavily loaded agtl+ bus, especially for systems using a single set of termination resistors (i.e., those on the processor substrate). such designs will not match the solution space allowed for by installation of termination resistors on the baseboard. see intels developers website (http://developer.intel.com) to download the pentium ? iii processor i/o buffer models, viewlogic* xtk* model format (formerly known as quad format) .
14 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 2.2 clock control and low power states pentium iii processors allow the use of autohalt, stop-grant, sleep, and deep sleep states to reduce power consumption by stopping the clock to internal sections of the processor, depending on each particular state. see figure 3 for a visual representation of the pentium iii processor low power states. figure 2. agtl+ bus topology pentium ? iii processor pentium iii processor asic figure 3. stop clock state machine pcb757a 2. auto halt power down state bclk running. snoops and interrupts allowed. halt instruction and halt bus cycle generated init#, binit#, intr, smi#, reset# 1. normal state normal execution. stpclk# asserted stpclk# de-asserted 3. stop grant state bclk running. snoops and interrupts allowed. slp# asserted slp# de-asserted 5. sleep state bclk running. no snoops or interrupts allowed. bclk input stopped bclk input restarted 6. deep sleep state bclk stopped. no snoops or interrupts allowed. 4. halt/grant snoop state bclk running. service snoops to caches. snoop event occurs snoop event serviced snoop event occurs snoop event serviced stpclk# asserted stpclk# de-asserted and stop-grant state entered from autohalt , nmi
datasheet 15 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz for the processor to fully realize the low current consumption of the stop-grant, sleep, and deep sleep states, a model specific register (msr) bit must be set. for the msr at 02ah (hex), bit 26 must be set to a 1 (this is the power on default setting) for the processor to stop all internal clocks during these modes. for more information, see the intel architecture software developers manual, volume 3: system programming guide (order number 243192). due to the inability of processors to recognize bus transactions during the sleep and deep sleep states, 2-way mp systems are not allowed to have one processor in sleep/deep sleep state and the other processor in normal or stop-grant state simultaneously. 2.2.1 normal statestate 1 this is the normal operating state for the processor. 2.2.2 autohalt powerdown statestate 2 autohalt is a low power state entered when the processor executes the halt instruction. the processor will transition to the normal state upon the occurrence of smi#, binit#, init#, or lint[1:0] (nmi, intr). reset# will cause the processor to immediately initialize itself. the return from a system management interrupt (smi) handler can be to either normal mode or the autohalt power down state. see the intel architecture software developer's manual, volume iii: system programmer's guide (order number 243192) for more information. flush# will be serviced during the autohalt state, and the processor will return to the autohalt state. the system can generate a stpclk# while the processor is in the autohalt power down state. when the system deasserts the stpclk# interrupt, the processor will return execution to the halt state. 2.2.3 stop-grant statestate 3 the stop-grant state on the processor is entered when the stpclk# signal is asserted. since the agtl+ signal pins receive power from the system bus, these pins should not be driven (allowing the level to return to v tt ) for minimum power drawn by the termination resistors in this state. in addition, all other input pins on the system bus should be driven to the inactive state. binit# and flush# will not be serviced during stop-grant state. reset# will cause the processor to immediately initialize itself, but the processor will stay in stop-grant state. a transition back to the normal state will occur with the deassertion of the stpclk# signal. a transition to the halt/grant snoop state will occur when the processor detects a snoop on the system bus (see section 2.2.4 ). a transition to the sleep state (see section 2.2.5 ) will occur with the assertion of the slp# signal. while in stop-grant state, smi#, init#, and lint[1:0] will be latched by the processor, and only serviced when the processor returns to the normal state. only one occurrence of each event will be recognized and serviced upon return to the normal state.
16 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 2.2.4 halt/grant snoop statestate 4 the processor will respond to snoop transactions on the pentium iii processor system bus while in stop-grant state or in autohalt power down state. during a snoop transaction, the processor enters the halt/grant snoop state. the processor will stay in this state until the snoop on the pentium iii processor system bus has been serviced (whether by the processor or another agent on the pentium iii processor system bus). after the snoop is serviced, the processor will return to the stop-grant state or autohalt power down state, as appropriate. 2.2.5 sleep statestate 5 the sleep state is a very low power state in which the processor maintains its context, maintains the phase-locked loop (pll), and has stopped all internal clocks. the sleep state can only be entered from the stop-grant state. once in the stop-grant state, the slp# pin can be asserted, causing the processor to enter the sleep state. the slp# pin is not recognized in the normal or autohalt states. snoop events that occur while in sleep state or during a transition into or out of sleep state will cause unpredictable behavior. in the sleep state, the processor is incapable of responding to snoop transactions or latching interrupt signals. no transitions or assertions of signals (with the exception of slp# or reset#) are allowed on the system bus while the processor is in sleep state. any transition on an input signal before the processor has returned to stop-grant state will result in unpredictable behavior. if reset# is driven active while the processor is in the sleep state, and held active as specified in the reset# pin specification, then the processor will reset itself, ignoring the transition through stop-grant state. if reset# is driven active while the processor is in the sleep state, the slp# and stpclk# signals should be deasserted immediately after reset# is asserted to ensure the processor correctly executes the reset sequence. while in the sleep state, the processor is capable of entering its lowest power state, the deep sleep state, by stopping the bclk input (see section 2.2.6 ). once in the sleep or deep sleep states, the slp# pin can be deasserted if another asynchronous system bus event occurs. the slp# pin has a minimum assertion of one bclk period. 2.2.6 deep sleep statestate 6 the deep sleep state is the lowest power state the processor can enter while maintaining context. the deep sleep state is entered by stopping the bclk input (after the sleep state was entered from the assertion of the slp# pin). the processor is in deep sleep state immediately after bclk is stopped. it is recommended that the bclk input be held low during the deep sleep state. stopping of the bclk input lowers the overall current consumption to leakage levels. to re-enter the sleep state, the bclk input must be restarted. a period of 1 ms (to allow for pll stabilization) must occur before the processor can be considered to be in the sleep state. once in the sleep state, the slp# pin can be deasserted to re-enter the stop-grant state. while in deep sleep state, the processor is incapable of responding to snoop transactions or latching interrupt signals. no transitions or assertions of signals are allowed on the system bus while the processor is in deep sleep state. any transition on an input signal before the processor has returned to stop-grant state will result in unpredictable behavior.
datasheet 17 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 2.2.7 clock control the processor provides the clock signal to the l2 cache. during autohalt power down and stop-grant states, the processor will process a system bus snoop. the processor will not stop the clock to the l2 cache during autohalt power down or stop-grant states. entrance into the halt/ grant snoop state will allow the l2 cache to be snooped, similar to the normal state. when the processor is in sleep and deep sleep states, it will not respond to interrupts or snoop transactions. during the sleep state, the clock to the l2 cache is not stopped. during the deep sleep state, the clock to the l2 cache is stopped. the clock to the l2 cache will be restarted only after the internal clocking mechanism for the processor is stable (i.e., the processor has re-entered sleep state). picclk should not be removed during the autohalt power down or stop-grant states. picclk can be removed during the sleep or deep sleep states. when transitioning from the deep sleep state to the sleep state, picclk must be restarted with bclk. 2.3 power and ground pins for clean on-chip power distribution, pentium iii processors have 27 v cc (power) and 30 v ss (ground) inputs. the 27 v cc pins are further divided to provide the different voltage levels to the components. v cc core inputs for the processor core and some l2 cache components account for 19 of the v cc pins, while 4 v tt inputs (1.5 v) are used to provide an agtl+ termination voltage to the processor and 3 v cc l2 /v cc 3.3 inputs (3.3 v) are either used for the off-chip l2 cache tagram and bsrams (cpuid 067xh) or for the voltage clamp logic (cpuid 068xh). one v cc 5 pin is provided for use by test equipment and tools. v cc 5 , v cc l2 /v cc 3.3 , and v cc core must remain electrically separated from each other. on the circuit board, all v cc core pins must be connected to a voltage island and all v cc l2 /v cc 3.3 pins must be connected to a separate voltage island (an island is a portion of a power plane that has been divided, or an entire plane). similarly, all v ss pins must be connected to a system ground plane. note: the voltage clamp logic acts as a voltage translator between the processors 1.5 v tolerant cmos signals and the 2.5 v cmos voltage on the motherboard. this logic is only available with pentium iii processors with cpuid=068xh. 2.4 decoupling guidelines due to the large number of transistors and high internal clock speeds, the processor is capable of generating large average current swings between low and full power states. this causes voltages on power planes to sag below their nominal values if bulk decoupling is not adequate. care must be taken in the board design to ensure that the voltage provided to the processor remains within the specifications listed in table 8 . failure to do so can result in timing violations or a reduced lifetime of the processor.
18 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 2.4.1 processor v cc core decoupling regulator solutions need to provide bulk capacitance with a low effective series resistance (esr) and keep an interconnect resistance from the regulator (or vrm pins) to the sc242 connector of less than 0.3 m w . this can be accomplished by keeping a maximum distance of 1.0 inches between the regulator output and sc242 connector. the recommended v cc core interconnect is a 2.0 inch wide by 1.0 inch long (maximum distance between the sc242 connector and the vrm connector) plane segment with a 1-ounce plating. bulk decoupling for the large current swings when the part is powering on, or entering/exiting low power states, is provided on the voltage regulation module (vrm). if using intels enabled vrm solutions see developer.intel.com for the specification and a list of qualified vendors. the v cc core input should be capable of delivering a recommended minimum dicc core /dt (defined in table 8 ) while maintaining the required tolerances (also defined in table 8 ). 2.4.2 processor system bus agtl+ decoupling the pentium iii processor contains high frequency decoupling capacitance on the processor substrate; bulk decoupling must be provided for by the system baseboard for proper agtl+ bus operation. see ap-906, 100 mhz agtl+ layout guidelines for the pentium ? iii processor and intel ? 440bx agpset (order number 245086) or the appropriate platform design guide, ap-907, pentium ? iii processor power distribution guidelines (order number 245085), and the gtl+ buffer specification in the pentium ? ii processor developer's manual (order number 243502) for more information. 2.5 processor system bus clock and processor clocking the bclk input directly controls the operating speed of the pentium iii processor system bus interface. all pentium iii processor system bus timing parameters are specified with respect to the rising edge of the bclk input. see the p6 family of processors hardware developer's manual (order number 244001) for further details. 2.6 voltage identification there are five voltage identification pins on the sc242 connector. these pins can be used to support automatic selection of power supply voltages. these pins are not signals, but are either an open circuit or a short circuit to v ss on the processor. the combination of opens and shorts defines the voltage required by the processor core. the vid pins are needed to cleanly support voltage specification variations on current and future pentium iii processors. vid[4:0] are defined in table 3 . a 1 in this table refers to an open pin and a 0 refers to a short to ground. the power supply must supply the voltage that is requested or disable itself. to ensure a system is ready for current and future pentium iii processors, the range of values in bold in table 3 should be supported. a smaller range will risk the ability of the system to migrate to a higher performance pentium iii processor and/or maintain compatibility with current pentium iii processors.
datasheet 19 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz notes: 1. 0 = processor pin connected to v ss . 2. 1 = open on processor; may be pulled up to ttl v ih on baseboard. 3. to ensure a system is ready for the pentium ? iii processor, the values in bold in table 3 should be supported. note that the 11111 (all opens) id can be used to detect the absence of a processor core in a given connector as long as the power supply used does not affect these lines. detection logic and pull-ups should not affect vid inputs at the power source (see section 7.0 ). the vid pins should be pulled up to a ttl-compatible level with external resistors to the power source of the regulator only if required by the regulator or external logic monitoring the vid[4:0] signals. the power source chosen must be guaranteed to be stable whenever the supply to the table 3. voltage identification definition 1, 2 processor pins vid4 vid3 vid2 vid1 vid0 vcc core 01111 1.30 01110 1.35 01101 1.40 01100 1.45 01011 1.50 01010 1.55 01001 1.60 3 01000 1.65 3 00111 1.70 3 00110 1.75 3 00101 1.80 3 00100 1.85 3 00011 1.90 3 00010 1.95 3 00001 2.00 3 00000 2.05 3 11111 no core 11110 2.1 11101 2.2 11100 2.3 11011 2.4 11010 2.5 11001 2.6 11000 2.7 10111 2.8 10110 2.9 10101 3.0 10100 3.1 10011 3.2 10010 3.3 10001 3.4 10000 3.5
20 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz voltage regulator is stable. this will prevent the possibility of the processor supply going above the specified v cc core in the event of a failure in the supply for the vid lines. in the case of a dc-to- dc converter, this can be accomplished by using the input voltage to the converter for the vid line pull-ups. a resistor of greater than or equal to 10 k w may be used to connect the vid signals to the converter input. 2.7 processor system bus unused pins all reserved pins must remain unconnected. connection of these pins to v cc core , v cc l2 / v cc 3.3 , v ss , or to any other signal (including each other) can result in component malfunction or incompatibility with future pentium iii processors. see section 5.5 for a pin listing of the processor and the location of each reserved pin. all testhi pins must be connected to 2.5 v via 1 k w -10 k w pull-up resistor. picclk must be driven with a valid clock input and the picd[1:0] lines must be pulled-up to 2.5 v even when the apic will not be used. a separate pull-up resistor must be provided for each apic data line. for reliable operation, always connect unused inputs or bidirectional signals to an appropriate signal level. unused agtl+ inputs should be left as no connects; agtl+ termination is provided on the processor. unused active low cmos inputs should be connected through a resistor to 2.5 v. unused active high inputs should be connected through a resistor to ground (v ss ). unused outputs can be left unconnected. a resistor must be used when tying bidirectional signals to power or ground. when tying any signal to power or ground, a resistor will also allow for system testability. for unused pins, it is suggested that ~10 k w resistors be used for pull-ups (except for picd[1:0] discussed above), and ~1 k w resistors be used as pull-downs. 2.8 processor system bus signal groups in order to simplify the following discussion, the pentium iii processor system bus signals have been combined into groups by buffer type. all pentium iii processor system bus outputs are open drain and require a high-level source provided externally by the termination or pull-up resistor. however, the pentium iii processor includes on-cartridge (cpuid 067xh) or on-die (cpuid 068xh) termination. agtl+ input signals have differential input buffers, which use v ref as a reference signal. agtl+ output signals require termination to 1.5 v. in this document, the term agtl+ input refers to the agtl+ input group as well as the agtl+ i/o group when receiving. similarly, agtl+ output refers to the agtl+ output group as well as the agtl+ i/o group when driving. emi pins may be connected to baseboard ground and/or to chassis ground through zero ohm (0 w ) resistors. the 0 w resistors should be placed in close proximity to the sc242 connector. the path to chassis ground should be short in length and have a low impedance. the cmos, clock, apic, and tap inputs can each be driven from ground to 2.5 v. the cmos, apic, and tap outputs are open drain and should be pulled high to 2.5 v. this ensures not only correct operation for current pentium iii processors, but compatibility with future pentium iii processors as well. the groups and the signals contained within each group are shown in table 4 . refer to section 7.0 for a description of these signals.
datasheet 21 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz notes: 1. the br0# pin is the only breq# signal that is bidirectional. the internal breq# signals are mapped onto br# pins after the agent id is determined. see section 7.0 for more information. 2. see section 7.0 for information on the pwrgood signal. 3. see section 7.0 for information on the slp# signal. 4. see section 7.0 for information on the thermtrip# signal. 5. these signals are specified for 2.5 v operation. 6. v cc core is the power supply for the processor core. v cc l2 /v cc 3.3 is described in section 2.3 . vid[4:0] is described in section 2.6 . v tt is used to terminate the system bus and generate vref on the processor substrate. v ss is system ground. testhi should be connected to 2.5 v with a 1 k w C10 k w resistor. v cc 5 is not connected to the pentium ? iii processor core. this supply is used for the test equipment and tools. slotocc# is described in section 7.0 . bsel[1:0] is described in section 2.8.2 and section 7.0 . emi pins are described in section 7.0 . thermdp, thermdn are described in section 7.0 . 2.8.1 asynchronous vs. synchronous for system bus si g nals all agtl+ signals are synchronous to bclk. all of the cmos, clock, apic, and tap signals can be applied asynchronously to bclk. all apic signals are synchronous to picclk. all tap signals are synchronous to tck. table 4. system bus signal groups group name signals agtl+ input bpri#, br1#, defer#, reset#, rs[2:0]#, rsp#, trdy# agtl+ output prdy# agtl+ i/o a[35:3]#, ads#, aerr#, ap[1:0]#, berr#, binit#, bnr#, bp[3:2]#, bpm[1:0]#, br0# 1 , d[63:0]#, dbsy#, dep[7:0]#, drdy#, hit#, hitm#, lock#, req[4:0]#, rp# cmos input 5 a20m#, flush#, ignne#, init#, lint0/intr, lint1/nmi, preq#, pwrgood 2 , smi#, slp# 3 , stpclk# cmos output 5 ferr#, ierr#, thermtrip# 4 system bus clock bclk apic clock picclk apic i/o 5 picd[1:0] tap input 5 tck, tdi, tms, trst# tap output 5 tdo power/other 6 v cc core , v cc l2 /v cc 3.3 , v cc 5 , vid[4:0], v tt , v ss , slotocc#, thermdp, thermdn, bsel[1:0], emi, testhi, reserved
22 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 2.8.2 system bus frequency select signal (bsel0) the bsel[1:0] signals (bsel0 is also known as 100/66#) are used to select the system bus frequency for the pentium iii processor(s). table 5 defines the possible combinations of the signals and the frequency associated with each combination. the frequency is determined by the processor(s), and frequency synthesizer. all system bus agents must operate at the same core and system bus frequency in a 2-way mp pentium iii processor configuration. in a 2-way mp system design, the bsel[1:0] signals must be connected to the bsel[1:0] pins of both processors. the pentium iii processor operates at either a 100 mhz or 133 mhz system bus frequency, but not both. 66 mhz system bus operation is not supported. for systems that support only a 100 mhz system bus clock, resistors on the processor cartridge will tie the bsel1 signal to ground (as shown in figure 4 ). this signal can either be left as a no connect or tied to ground as shown below. the bsel0 should be pulled up to 3.3 v with a 220 w resistor, and provided as a frequency driver to the clock driver/synthesizer. on baseboards which support operation at either 100 or 133 mhz, the bsel[1:0] signals should be pulled up to 3.3 v with a 220 w resistor (as shown in figure 5 and figure 6 ) and bsel1 is provided as a frequency selection signal to the clock driver/synthesizer. the bsel0 signal can also be incorporated into system shutdown logic on the baseboard (thus forcing the system to shutdown as long as the bsel0 signal is low). figure 4 shows this routing example with a 100 mhz pentium iii processor. figure 5 shows the same routing example with a 133 mhz pentium iii processor. table 5. frequency select truth table for bsel[1:0] bsel1 bsel0 frequency 0 0 66mhz (unsupported) 0 1 100 mhz 10reserved 1 1 133mhz figure 4. bsel[1:0] example for a 100 mhz system design (100 mhz processor installed) processor core gnd gnd bsel1 0 w 0 w 1 kw 3.3 kw 100/66# ck100 gnd 3.3v 220 w bsel0 s c 2 4 2 intel ? pentium ? iii processor
datasheet 23 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 2.9 test access port (tap) connection due to the voltage levels supported by other components in the test access port (tap) logic, it is recommended that the pentium iii processor be first in the tap chain and followed by any other components within the system. a translation buffer should be used to connect to the rest of the chain unless one of the other components is capable of accepting a 2.5 v input. similar considerations must be made for tck, tms, and trst#. two copies of each signal may be required with each driving a different voltage level. the debug port should be placed at the start and end of the tap chain with the tdi of the first component coming from the debug port and the tdo from the last component going to the debug port. in a 2-way mp system, be cautious when including an empty sc242 connector in the scan chain. all connectors in the scan chain must have a processor installed to complete the chain or the system must support a method to bypass the empty connectors; sc242 terminator substrates should not connect tdi to tdo in order to avoid placing the tdo pull-up resistors in parallel. see sc242 terminator card design guidelines (order number 243409) for more details. figure 5. bsel[1:0] example for a 100/133 mhz capable system (100 mhz processor installed) figure 6. bsel[1:0] example for a 100/133 mhz capable system (133 mhz processor installed) processor core gnd gnd 1 kw 3.3 kw system shutdown logic 3.3v 220 w bsel0 s c 2 4 2 133/100# ck133 3.3v 220 w bsel1 0 w 0 w intel ? pentium ? iii processor processor core gnd gnd 1 kw 3.3 kw system shutdown logic 3.3v 220 w bsel0 s c 2 4 2 133/100# ck133 3.3v 220 w bsel1 1 kw 3.3 kw intel ? pentium ? iii processor
24 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 2.10 maximum ratings table 6 contains pentium iii processor stress ratings only. functional operation at the absolute maximum and minimum is not implied nor guaranteed. the processor should not receive a clock while subjected to these conditions. functional operating conditions are given in the ac and dc tables in section 2.11 and section 2.13 . extended exposure to the maximum ratings may affect device reliability. furthermore, although the processor contains protective circuitry to resist damage from static electric discharge, one should always take precautions to avoid high static voltages or electric fields. notes: 1. operating voltage is the voltage to which the component is designed to operate. see table 8 . 2. this rating applies to the v cc core , v cc l2 /v cc 3.3 , v cc 5 , and any input (except as noted below) to the processor. 3. parameter applies to cmos, apic, and tap bus signal groups only. 4. the mechanical integrity of the latch arms is specified to last a maximum of 50 cycles. 5. the electrical and mechanical integrity of the processor edge fingers are specified to last for 50 insertion/ extraction cycles. 6. while insertion/extraction cycling above 50 insertions will cause an increase in the contact resistance (above 0.1 w ) and a degradation in the material integrity of the edge finger gold plating, it is possible to have processor functionality above the specified limit. the actual number of insertions before processor failure will vary based upon system configuration and environmental conditions. 7. this specification only applies to s.e.c.c. packaged processors. table 6. absolute maximum ratings (cpuid 067xh) symbol parameter min max unit notes t storage processor storage temperature C40 85 c v cc (all) any processor supply voltage with respect to v ss C0.5 operating voltage + 1.0 v1, 2 v in agtl agtl+ buffer dc input voltage with respect to v ss C0.3 v cc core + 0.7 v v in cmos cmos buffer dc input voltage with respect to v ss C0.3 3.3 v 3 i vid max vid pin current 5 ma i slotocc max slotocc# pin current 5 ma mech max latch arms mechanical integrity of latch arms 50 cycles 4, 7 mech max edge fingers mechanical integrity of processor edge fingers 50 insertions/ extractions 5, 6
datasheet 25 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz notes: 1. operating voltage is the voltage to which the component is designed to operate. see table 7 . 2. input voltage can never be above v ss + 2.3 v. 3. input voltage can never be below v tt - 2.3 v. 4. parameter applies to the 2.5 v processor core signals (bclk, picclk, and pwrgood). 5. parameter applies to the 1.5 v processor core signals (all signals except bclk, picclk, and pwrgood). 6. the electrical and mechanical integrity of the processor edge fingers are specified to last for 50 insertion/ extraction cycles. 7. while insertion/extraction cycling above 50 insertions will cause an increase in the contact resistance (above 0.1 w ) and a degradation in the material integrity of the edge finger gold plating, it is possible to have processor functionality above the specified limit. the actual number of insertions before processor failure will vary based upon system configuration and environmental conditions. 2.11 processor dc specifications the processor dc specifications in this section are defined at the pentium iii processor core pins, edge fingers, and at the sc242 connector pins. see section 7.0 for the processor edge finger signal definitions and section 5.0 for the core pin locations and the signal listing. most of the signals on the pentium iii processor system bus are in the agtl+ signal group. these signals are specified to be terminated to 1.5 v. the dc specifications for these signals are listed in table 9 . to allow connection with other devices, the clock, cmos, apic, and tap signals are designed to interface at non-agtl+ levels. the dc specifications for these pins are listed in table 10 . table 8 through table 11 list the dc specifications for pentium iii processors. specifications are valid only while meeting specifications for case temperature, clock frequency, and input voltages. care should be taken to read all notes associated with each parameter. table 7. absolute maximum ratings (cpuid 068xh) symbol parameter min max unit notes t storage processor storage temperature C40 85 c v cc core and v tt processor core voltage and termination supply voltage with respect to v ss -0.5 2.1 v v cc l2 /v cc 3.3 v cc 3.3 with respect to v ss C0.5 5.0 v 1 v in 1.5 1.5 v buffer input voltage v tt C 2.3 v ss + 2.3 v 2, 3, 5 v in 2.5 2.5 v buffer input voltage C0.7 3.3 v 4 i vid max vid pin current 5 ma i slotocc max slotocc# pin current 5 ma mech max edge fingers mechanical integrity of processor edge fingers 50 insertions/ extractions 6, 7
26 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz table 8. voltage and current specifications symbol parameter core freq min typ max unit notes 1 v cc core v cc for processor core 450 mhz 500 mhz 533b mhz 533eb mhz 550 mhz 550e mhz 600 mhz 600b mhz 600e mhz 600eb mhz 650 mhz 667 mhz 700 mhz 733 mhz 750 mhz 800 mhz 800eb mhz 850 mhz 866 mhz 933 mhz 1.0b ghz 2.00 2.00 2.00 1.65 2.00 1.65 2.05 2.05 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.70 1.70 v 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5 2, 3, 4, 5, 21 v cc l2 / v cc 3.3 v cc for second level cache or voltage clamp logic 3.135 3.3 3.465 v 3.3 v 5% 9 v tt agtl+ bus termination voltage 1.365 1.50 1.635 v 1.5 9% 6 baseboard tolerance, static processor core voltage static tolerance level at sc242 pins C0.070 C0.080 C0.050 0.070 0.040 0.040 v 2 , 7 , 1 8 2, 7, 19 2, 7, 19, 21 baseboard tolerance, transient processor core voltage transient tolerance level at sc242 pins C0.140 C0.080 C0.050 0.140 0.050 0.040 v 2 , 7 , 1 8 2, 7, 19 2, 7, 19, 21 v cc core tolerance, static processor core voltage static tolerance level at edge fingers C0.085 C0.110 C0.065 0.085 0.040 0.040 v 2 , 8 , 1 8 2, 8, 19 2, 8, 19, 21 v cc core tolerance, transient processor core voltage transient tolerance level at edge fingers C0.170 C0.110 C0.065 0.170 0.080 0.080 v 2 , 8 , 1 8 2, 8, 19 2, 8, 19, 21 i cc core i cc for processor core 450 mhz 500 mhz 533b mhz 533eb mhz 550 mhz 550e mhz 600 mhz 600b mhz 600e mhz 600eb mhz 650 mhz 667 mhz 700 mhz 733 mhz 750 mhz 800 mhz 800eb mhz 850 mhz 866 mhz 933 mhz 1.0b ghz 14.5 16.1 16.7 10.6 17.0 11.0 17.8 17.8 13.0 13.0 13.0 13.3 14.0 14.6 15.0 16.0 16.0 16.2 16.3 17.7 19.4 a 2, 3, 10, 11 2, 3, 10, 11 2, 3, 10, 11 2, 3, 20 2, 3, 10, 11 2, 3, 20 2, 3, 10, 11 2, 3, 10, 11 2, 3, 20 2, 3, 20 2, 3, 20 2, 3, 20 2, 3, 20 2, 3, 20 2, 3, 20 2, 3, 20 2, 3, 20 2, 3, 20 2, 3, 20 2, 3, 20 2, 3, 20, 21
datasheet 27 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz i cc l2 i cc for second level cache 450 mhz 500 mhz 533b mhz 550 mhz 600 mhz 600b mhz 1.08 1.21 1.29 1.33 1.45 1.45 a 2, 9, 10, 18 2, 9, 10, 18 2, 9, 10, 18 2, 9, 10, 18 2, 9, 10, 18 2, 9, 10, 18 i vtt termination voltage supply current 2.7 a 12 i sg nt i cc stop-grant for processor core 450 mhz 500 mhz 533b mhz 533eb mhz 550 mhz 550e mhz 600 mhz 600b mhz 600e mhz 600eb mhz 650 mhz 667 mhz 700 mhz 733 mhz 750 mhz 800 mhz 800eb mhz 850 mhz 866 mhz 933 mhz 1.0b ghz 1.20 1.40 1.49 2.50 1.54 2.50 1.68 1.68 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 a 2, 10, 13 2, 10, 13 2, 10, 13 2, 10, 13 2, 10, 13 2, 10, 13 2, 10, 13 2 , 1 0 , 1 3 2, 10, 13 2, 10, 13 2, 10, 13 2, 10, 13 2 , 1 0 , 1 3 2, 10, 13 2, 10, 13 2, 10, 13 2, 10, 13 2, 10, 13 2, 10, 13 2, 10, 13 2, 10, 13 i sg ntl2 i cc stop-grant for second level cache 0.1 a 2, 9, 10, 18 i slp i cc sleep for processor core 450 mhz 500 mhz 533b mhz 533eb mhz 550 mhz 550e mhz 600 mhz 600b mhz 600e mhz 600eb mhz 650 mhz 667 mhz 700 mhz 733 mhz 750 mhz 800 mhz 800eb mhz 850 mhz 866 mhz 933 mhz 1.0b ghz 0.80 0.90 1.00 2.50 1.00 2.50 1.00 1.00 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 a 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 2, 10 i sl pl2 i cc sleep for second level cache 0.1 a 2, 9, 10, 18 i dslp i cc deep sleep for processor core 0.50 2.20 a 2 , 1 0 , 1 8 2, 10, 19 i dsl pl2 i cc deep sleep for second level cache 0.1 a 2, 9, 10, 18 di cc core /dt power supply current slew rate 20 a/s 2, 14, 15, 16 table 8. voltage and current specifications (continued) symbol parameter core freq min typ max unit notes 1
28 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all processor frequencies. 2. this specification applies to pentium ? iii processors. for baseboard compatibility information on pentium ii processors, refer to the pentium ? ii processor at 350, 400 and 450 mhz datasheet (order number 243657) . 3. v cc core and icc core supply the processor core. 4. a variable voltage source should exist on all systems in the event that a different voltage is required. see section 2.6 and table 1 for more information. 5. use the typical voltage specification with the tolerance specifications to provide correct voltage regulation to the processor. 6. v tt must be held to 1.5 v 9%. it is recommended that v tt be held to 1.5 v 3% while the pentium iii processor system bus is idle. this is measured at the processor edge fingers across a 20 mhz bandwidth. 7. these are the tolerance requirements, across a 20 mhz bandwidth, at the sc242 connector pin on the bottom side of the baseboard. the requirements at the sc242 connector pins account for voltage drops (and impedance discontinuities) across the connector, processor edge fingers, and to the processor core. v cc core must return to within the static voltage specification within 100 m s after a transient event; see the vrm 8.2 dc-dc converter design guidelines (order number 243773) for further details. 8. these are the tolerance requirements, across a 20 mhz bandwidth, at the processor edge fingers. the requirements at the processor edge fingers account for voltage drops (and impedance discontinuities) at the processor edge fingers and to the processor core. v cc core must return to within the static voltage specification within 100 m s after a transient event. 9. v cc l2 /v cc 3.3 and i ccl2 /i cc3.3 supply the second level cache (discrete cache type only). unless otherwise noted, this specification applies to all pentium iii processor cache sizes. systems should be designed for these specifications, even if a smaller cache size is used. 10.max i cc measurements are measured at v cc max voltage, maximum temperature, under maximum signal loading conditions. the max icc currents specified do not occur simultaneously under the stress measurement condition. 11.voltage regulators may be designed with a minimum equivalent internal resistance to ensure that the output voltage, at maximum current output, is no greater than the nominal (i.e., typical) voltage level of v cc core (v cc core_typ ). in this case, the maximum current level for the regulator, icc core_reg , can be reduced from the specified maximum current icc core _max and is calculated by the equation: icc core_reg = icc core_max v cc core_typ / (v cc core_typ + v cc core tolerance, transient) 12.the current specified is the current required for a single pentium iii processor. a similar amount of current is drawn through the termination resistors on the opposite end of the agtl+ bus, unless single-ended termination is used (see section 2.1 ). 13.the current specified is also for autohalt state. 14.maximum values are specified by design/characterization at nominal v cc core and nominal v cc l2 /v cc 3.3 . 15.based on simulation and averaged over the duration of any change in current. use to compute the maximum inductance tolerable and reaction time of the voltage regulator. this parameter is not tested. 16.di cc /dt specifications are measured and specified at the sc242 connector pins. 17.vcc 5 and i cc 5 are not used by the pentium iii processors. the v cc 5 supply is used for the test equipment and tools. 18.this specification applies to the pentium ? iii processor with cpuid=067xh. 19.this specification applies to the pentium ? iii processor with cpuid=068xh. 20.max i cc measurements are measured at v cc nominal voltage, maximum temperature, under maximum signal loading conditions. the max icc currents specified do not occur simultaneously under the stress measurement condition. 21..this specification applies to the pentium ? iii processor with cpuid=0683h operating at 1.0 ghz. di cc l2 /dt l2 cache power supply current slew rate 1a/ m s 14, 15, 16, 18 di cc v tt /dt termination current slew rate 8a/s 14, 15, see table 11 v cc 5 5 v supply voltage 4.75 5.00 5.25 v 5 v 5% 16, 17 i cc 5 i cc for 5 v supply voltage 1.0 a 17 table 8. voltage and current specifications (continued) symbol parameter core freq min typ max unit notes 1
datasheet 29 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz notes: 1. unless otherwise noted, all specifications in this table apply to pentium ? iii processor frequencies. 2. v ih and v oh for the pentium iii processor may experience excursions up to 200 mv above v tt for a single system bus clock. however, input signal drivers must comply with the signal quality specifications in section 3.0 . 3. minimum and maximum v tt are given in table 11 . 4. parameter correlated to measure into a 25 w resistor terminated to 1.5 v. 5. i oh for the pentium iii processor may experience excursions of up to a 12 ma for a single bus clock. 6. leakage current affects input, output, and i/o signals. 7. (0 v in 2.0 v +5%). 8. (0 v out 2.0 v +5%). 9. refer to the pentium iii i/o buffer models for i/v characteristics. 10.(0 v in 1.5 v +5%). 11. (0 v out 1.5 v +5%). 12.this specification applies to the pentium ? iii processor with cpuid=067xh. 13.this specification applies to the pentium ? iii processor with cpuid=068xh. notes: 1. unless otherwise noted, all specifications in this table apply to all intel ? pentium ? iii processor frequencies. 2. these values are specified at the processor core pins. 3. these values are specified at the processor edge fingers. 4. parameter measured at 14 ma (for use with ttl inputs). 5. leakage current affects input, output and i/o signals. 6. (0 v in 2.5 v +5%). 7. (0 v out 2.5 v +5%). 8. this specification applies to the pentium ? iii processor with cpuid=067xh. 9. this specification applies to the pentium ? iii processor with cpuid=068xh. 10.parameters apply to all non-agtl+ signals except for bclk, picclk, and pwrgood. table 9. agtl+ signal groups dc specifications 1, 4, 5 symbol parameter min max unit notes v il input low voltage C0.30 C0.15 0 . 8 2 v ref - 0.20 v v 1 2 13 v ih input high voltage 1.22 v ref + 0.20 v tt v tt v 2, 3, 12 2, 3, 13 ron buffer on resistance 16.67 w 9 i l leakage current 100 100 a a 6, 7, 8, 12 6, 10, 11, 13 table 10. non-agtl+ signal group dc specifications 1 symbol parameter min max unit notes v il input low voltage C0.30 C0.15 C0.30 C0.30 C0.15 0 . 5 0 . 7 0 . 5 0 . 7 0.7 v v v v v 3, 8 3 , 9 , 1 0 2, 9; bclk only 2, 9; picclk only 2, 9; pwrgood only v ih input high voltage 1.7 1.7 2.0 2.625 2.625 2.625 v v v 3, 8 3, 9, 10 2, 9; bclk, picclk, and pwrgood only v ol output low voltage 0.4 0.5 v v 3, 4, 8 3, 4, 9 v oh output high voltage n/a 2.625 v all outputs are open- drain i ol output low current 14 ma 3 i l leakage current 100 a 5, 6, 7
30 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 2.12 agtl+ system bus specifications it is recommended that the agtl+ bus be routed in a daisy-chain fashion with termination resistors to v tt at each end of the signal trace. these termination resistors are placed electrically between the ends of the signal traces and the v tt voltage supply and generally are chosen to approximate the substrate impedance. the valid high and low levels are determined by the input buffers using a reference voltage called v ref . table 11 lists the nominal specification for the agtl+ termination voltage (v tt ). the agtl+ reference voltage (v ref ) is generated on the processor substrate for the processor core, but should be set to 2/3 v tt for other agtl+ logic using a voltage divider on the baseboard. it is important that the baseboard impedance be specified and held to a 15% tolerance, and that the intrinsic trace capacitance for the agtl+ signal group traces is known and well-controlled. for more details on the gtl+ buffer specification, see the pentium ? ii processor developer's manual (order number 243502) and ap-585, pentium ? ii processor gtl+ guidelines (order number 243330). notes: 1. unless otherwise noted, all specifications in this table apply to all pentium ? iii processor frequencies. 2. pentium iii processors contain agtl+ termination resistors at the end of each signal trace on the processor substrate. pentium iii processors generate v ref on the processor substrate by using a voltage divider on v tt supplied through the sc 242 connector. 3. v tt must be held to 1.5 v 9%; di cc vtt /dt is specified in table 8 . it is recommended that v tt be held to 1.5 v 3% while the pentium iii processor system bus is idle. this is measured at the processor edge fingers. 4. r tt must be held within a tolerance of 5% 5. v ref is generated on the processor substrate to be 2/3 v tt 2% nominally. 2.13 system bus ac specifications the pentium iii processor system bus timings specified in this section are defined at the pentium iii processor core pads. unless otherwise specified, timings are tested at the processor core during manufacturing. see section 7.0 for the pentium iii processor edge connector signal definitions. see section 5.6 for the pentium iii processor closest accessible core pad to substrate via assignment. table 12 through table 18 list the ac specifications associated with the pentium iii processor system bus. these specifications are broken into the following categories: table 12 through table 13 contain the system bus clock core frequency and cache bus frequencies, table 14 contains the agtl+ specifications, table 15 contains the cmos signal group specifications, table 16 contains timings for the reset conditions, table 17 covers apic bus timing, and table 18 covers tap timing. all pentium ii processor system bus ac specifications for the agtl+ signal group are relative to the rising edge of the bclk input. all agtl+ timings are referenced to v ref for both 0 and 1 logic levels unless otherwise specified. the timings specified in this section should be used in conjunction with the i/o buffer models provided by intel. these i/o buffer models, which include package information, are available for the pentium iii processor in viewlogic xtk model format (formerly known as quad format) as table 11. agtl+ bus specifications 1, 2 symbol parameter min typ max units notes v tt bus termination voltage 1.365 1.50 1.635 v 3 r tt termination resistor 56 w 4 v ref bus reference voltage 0.95 2/3 v tt 1.05 v 5
datasheet 31 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz the pentium ? iii processor i/o buffer models on intels developers website (http://developer.intel.com.) agtl+ layout guidelines are also available in ap-906, 100 mhz agtl+ layout guidelines for the pentium ? iii processor and intel ? 440bx agpset (order number 245086) or the appropriate platform design guide. care should be taken to read all notes associated with a particular timing parameter. 1. unless otherwise noted, all specifications in this table apply to all pentium ? iii processor frequencies. 2. all ac timings for the agtl+ signals are referenced to the bclk rising edge at 1.25 v at the processor core pin. all agtl+ signal timings (address bus, data bus, etc.) are referenced at 1.00 v at the processor core pins. 3. all ac timings for the cmos signals are referenced to the bclk rising edge at 1.25 v at the processor core pin. all cmos signal timings (compatibility signals, etc.) are referenced at 1.25 v at the processor core pins. 4. the internal core clock frequency is derived from the pentium iii processor system bus clock. the system bus clock to core clock ratio is fixed for each processor. individual processors will only operate at their specified system bus frequency, either 100mhz or 133 mhz. table 13 shows the supported ratios for each processor. 5. the bclk period allows a +0.5 ns tolerance for clock driver variation. 6. due to the difficulty of accurately measuring clock jitter in a system, it is recommended that a clock driver be used that is designed to meet the period stability specification into a test load of 10 to 20 pf. this should be measured on the rising edges of adjacent bclks crossing 1.25 v at the processor core pin . the jitter present must be accounted for as a component of bclk timing skew between devices. 7. the clock drivers closed loop jitter bandwidth must be set low to allow any pll-based device to track the jitter created by the clock driver. the C20 db attenuation point, as measured into a 10 to 20 pf load, should be less than 500 khz. this specification may be ensured by design characterization and/or measured with a spectrum analyzer. 8. not 100% tested. specified by design characterization as a clock driver requirement. 9. the average period over a 1us period of time must be greater than the minimum specified period. 10.this specification applies to the pentium iii processor with a system bus frequency of 100 mhz . 11.this specification applies to the pentium iii processor with a system bus frequency of 133 mhz . table 12. system bus ac specifications (clock) at processor core pins 1, 2, 3 t# parameter min nom max unit figure notes system bus frequency 100.00 133.33 mhz mhz 4, 10 4, 11 t1: bclk period 10.0 7.5 ns ns 7 7 4, 5, 10 4, 5, 11 t2: bclk period stability 250 ps 7 7, 9 t3: bclk high time 2.5 1.4 ns ns 7 7 @>2.0 v, 10 @>2.0 v, 11 t4: bclk low time 2.4 1.4 ns ns 7 7 @<0.5 v 6, 10 @<0.5 v 6, 11 t5: bclk rise time 0.4 1.60 ns 7 (0.5 vC2.0 v) 8, 10, 11 t6: bclk fall time 0.4 1.60 ns 7 (2.0 vC0.5 v) 8, 10, 11
32 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz note: 1. contact your local intel representative for the latest information on processor frequencies and/or frequency multipliers. notes: 1. unless otherwise noted, all specifications in this table apply to all pentium ? iii processor frequencies. 2. these specifications are tested during manufacturing. 3. all ac timings for the agtl+ signals are referenced to the bclk rising edge at 1.25 v at the processor core pin. all agtl+ signal timings (compatibility signals, etc.) are referenced at 1.00 v at the processor core pins. 4. valid delay timings for these signals are specified into 25 w to 1.5 v and with vref at 1.0 v. 5. valid delay timings for these signals are specified into 50 w to 1.5 v and with vref at 1.0 v. 6. a minimum of 3 clocks must be guaranteed between two active-to-inactive transitions of trdy#. 7. reset# can be asserted (active) asynchronously, but must be deasserted synchronously. for 2-way mp systems, reset# should be synchronous. 8. specification is for a minimum 0.40 v swing. 9. specification is for a maximum 1.0 v swing. 10.this should be measured after v cc core , v cc l2 /v cc 3.3 , and bclk become stable. 11.this specification applies to the pentium ? iii processor with a system bus frequency of 100 mhz . 12.this specification applies to the pentium ? iii processor with a system bus frequency of 133 mhz . table 13. valid system bus, core frequency, and cache bus frequencies 1 processor core frequency (mhz) bclk frequency (mhz) frequency multiplier l2 cache (mhz) 450 450 100 9/2 225 500 500 100 5 250 533b 533 133 4 267 533eb 533 133 4 533 550 550 100 11/2 275 550e 550 100 11/2 550 600 600 100 6 300 600b 600 133 9/2 300 600e 600 100 6 600 600eb 600 133 9/2 600 650 650 100 13/2 650 667 666.67 133 5 666.67 700 700 100 7 700 733 733 133 11/2 733 750 750 100 15/2 750 800 800 100 8 800 800eb 800 133 6 800 850 850 100 17/2 850 866 866 133 13/2 866 933 933 133 7 933 1.0b ghz 1000.0 133 15/2 1000.0 table 14. system bus ac specifications (agtl+ signal group) at the processor core pins 1, 2, 3 t# parameter min max unit figure notes t7: agtl+ output valid delay -0.20 -0.14 -0.10 3.15 2.20 2.70 ns n s ns 8 8 8 4, 10, 13 5, 11, 13 5, 11, 12, 14 t8: agtl+ input setup time 1.90 1.20 1.20 ns n s ns 9 9 9 6, 7, 8, 11, 13 6, 7, 8, 12, 13 6, 7, 8, 11, 12, 14 t9: agtl+ input hold time 0.85 0.58 0.80 ns n s ns 9 9 9 9, 11, 13 9, 12, 13 9, 11, 12, 14 t10: reset# pulse width 1.00 ms 11 7, 10
datasheet 33 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 13.this specification applies to the pentium ? iii processor with cpuid=067xh. 14.this specification applies to the pentium ? iii processor with cpuid=068xh.
34 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all pentium ? iii processor frequencies. 2. these specifications are tested during manufacturing. 3. all ac timings for the cmos signals are referenced to the bclk rising edge at 0.7 v at the processor core pins. all cmos signal timings (compatibility signals, etc.) are referenced at 1.25 v. 4. these signals may be driven asynchronously. 5. when driven inactive or after v cc core , v cc l2 /v cc 3.3 , and bclk become stable. notes: 1. unless otherwise noted, all specifications in this table apply to all pentium ? iii processor frequencies. . notes: 1. unless otherwise noted, all specifications in this table apply to all pentium ? iii processor frequencies. 2. these specifications are tested during manufacturing. 3. all ac timings for the apic i/o signals are referenced to the picclk rising edge at 1.25 v at the processor core pins. all apic i/o signal timings are referenced at 1.25 v (cpuid 067xh) or 0.75 v (cpuid 068xh) at the processor core pins. 4. referenced to picclk rising edge. 5. for open drain signals, valid delay is synonymous with float delay. 6. valid delay timings for these signals are specified into a 150 w load pulled up to 2.5 v +5%. 7. this specification applies to the pentium ? iii processor with cpuid=067xh. 8. this specification applies to the pentium ? iii processor with cpuid=068xh. table 15. system bus ac specifications (cmos signal group) at the processor core pins 1, 2, 3, 4 t# parameter min max unit figure notes t14: cmos input pulse width, except pwrgood 2bclks 8 active and inactive states t15: pwrgood inactive pulse width 10 bclks 8 , 11 5 table 16. system bus ac specifications (reset conditions) 1 t# parameter min max unit figure notes t16: reset configuration signals (a[14:5]#, br0#, flush#, init#) setup time 4bclks 10 before deassertion of reset# t17: reset configuration signals (a[14:5]#, br0#, flush#, init#) hold time 220bclks 10 after clock that deasserts reset# table 17. system bus ac specifications (apic clock and apic i/o) at the processor core pins 1, 2, 3 t# parameter min max unit figure notes t21: picclk frequency 2.0 33.3 mhz t22: picclk period 30.0 500.0 ns 7 t23: picclk high time 12.0 ns 7 t24: picclk low time 12.0 ns 7 t25: picclk rise time 0.25 3.0 ns 7 t26: picclk fall time 0.25 3.0 ns 7 t27: picd[1:0] setup time 8 . 0 5.0 n s ns 9 9 4 , 7 4, 8 t28: picd[1:0] hold time 2.5 ns 9 4 t29: picd[1:0] valid delay 1.5 10 ns 8 4, 5, 6, 7 t29a: picd[1:0] valid delay (rising edge) 1.5 8.7 ns 8 4, 5, 6, 8 t29b: picd[1:0] valid delay (falling edge) 1.5 12.0 ns 8 4, 5, 6, 8
datasheet 35 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all pentium ? iii processor frequencies. 2. all ac timings for the tap signals are referenced to the tck rising edge at 1.25 v (cpuid 067xh) or 0.75 v (cpuid 068xh) at the processor core pins. all tap signal timings (tms, tdi, etc.) are referenced at 1.25 v (cpuid 067xh) or 0.75 v (cpuid 068xh) at the processor core pins. 3. these specifications are tested during manufacturing, unless otherwise noted. 4. 1 ns can be added to the maximum tck rise and fall times for every 1 mhz below 16.667 mhz. 5. referenced to tck rising edge. 6. referenced to tck falling edge. 7. valid delay timing for this signal is specified to 2.5 v +5%. 8. non-test outputs and inputs are the normal output or input signals (besides tck, trst#, tdi, tdo, and tms). these timings correspond to the response of these signals due to tap operations. 9. during debug port operation, use the normal specified timings rather than the tap signal timings. 10.not 100% tested. specified by design characterization. 11.this specification applies to the pentium ? iii processor with cpuid=067xh. 12.this specification applies to the pentium ? iii processor with cpuid=068xh. table 18. system bus ac specifications (tap connection) at the processor core pins 1, 2, 3 t# parameter min max unit figure notes t30: tck frequency 16.667 mhz t31: tck period 60.0 ns 7 t32: tck high time 25.0 25.0 n s ns 7 7 @1.7 v 10, 11 @v ref + 0.20 v 10, 12 t33: tck low time 25.0 25.0 n s ns 7 7 @0.7 v 10, 11 @v ref C 0.20 v 10, 12 t34: tck rise time 5.0 5.0 n s ns 7 7 (0.7 vC1.7 v) 4, 10, 11 (v ref C 0.20 v) C (v ref + 0.20 v) 10, 12 t35: tck fall time 5.0 5.0 n s ns 7 7 (1.7 vC0.7 v) 4, 10 (v ref + 0.20 v) C (v ref C 0.20 v) 10, 12 t36: trst# pulse width 40.0 ns 13 asynchronous 10 t37: tdi, tms setup time 5.0 ns 12 5 t38: tdi, tms hold time 14.0 ns 12 5 t39: tdo valid delay 1.0 10.0 ns 12 6, 7 t40: tdo float delay 25.0 ns 12 6, 7, 10 t41: all non-test outputs valid delay 2.0 25.0 ns 12 6, 8, 9 t42: all non-test inputs setup time 25.0 ns 12 6, 8, 9, 10 t43: all non-test inputs setup time 5.0 ns 12 5, 8, 9 t44: all non-test inputs hold time 13.0 ns 12 5, 8, 9
36 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz note: for figure 7 through figure 13 , the following apply: 1. figure 7 through figure 13 are to be used in conjunction with table 12 through table 18 . 2. all ac timings for the agtl+ signals at the processor core pins are referenced to the bclk rising edge at 1.25 v. all agtl+ signal timings (address bus, data bus, etc.) are referenced at 1.00 v at the processor core pins. pentium iii figure 7. bclk, picclk, and tck generic clock waveform figure 8. system bus valid delay timings t r = t5, t25, t34, (rise time) t f = t6, t26, t35, (fall time) t h = t3, t23, t32, (high time) t l = t4, t24, t33, (low time) t p = t1, t22, t31 (bclk, tck, picclk period) v1 = bclk = 0.5v, picclk = 0.7v, and tck = 0.7v (cpuid 067xh) or v ref - 0.20v (cpuid 068xh) v2 = bclk = 1.25v, picclk = 1.25v and tck = 1.25v (cpuid 067xh) or 0.75v (cpuid 068xh) v3 = bclk = 2.0v, picclk = 1.7v (cpuid 067xh) or 2.0v (cpuid 068xh), tck = 1.7v (cpuid 067xh) or v ref - 0.20v (cpuid 068xh) v3 v2 v1 t r t p t f t h t l clk clk signal 762 valid valid tx v tx tpw tx = t7, t29, t29a, t29b (valid delay) tpw = t14, t15 (pulse width) v = 1.0v for agtl+ signal group; 1.25v (cpuid 067xh) or 0.75v (cpuid 068xh) for apic and tap signal groups
datasheet 37 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 9. system bus setup and hold timings figure 10. system bus reset and configuration timings figure 11. power-on reset and configuration timings clk signal 62 valid ts v th ts = t8, t27 (setup time) th = t9, t28 (hold time) v = 1.0v for agtl+ signal group; 1.25v (cpuid 067xh) or 0.75v (cpuid 068xh) for apic and tap signal groups valid t v t w t x t u t t bclk reset# configuration (a[14:5]#, br0#, flush#, int#) t t = t9 (agtl+ input hold time) t u = t8 (agtl+ input setup time) t v = t10 (reset# pulse width) t w = t16 (reset configuration signals (a[14:5]#, br0#, flush#, init#) setup time) t x = t17 (reset configuration signals (a[14:5]#, br0#, flush#, init#) hold time) t a t b pwrgood reset# t a = t15 (pwrgood inactive pulse) t b = t10 (reset# pulse width) bclk v il, max v ih, min vccp, vcc, v ref
38 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 12. test timings (tap connection) figure 13. test reset timings t r = t43 (all non-test inputs setup time) t s = t44 (all non-test inputs hold time) t u = t40 (tdo float delay) t v = t37 (tdi, tms setup time) t w = t38 (tdi, tms hold time) t x = t39 (tdo valid delay) t y = t41 (all non-test outputs valid delay) t z = t42 (all non-test outputs float time) v = 1.25v (cpuid 067xh) or 0.75v (cpuid 068xh) t v t w t r t s t u t z t x t y tck tdi, tms input signal tdo output signal v v t q trst# t q = t36 (trst# pulse width) v = 1.25v (cpuid 067xh) or 0.75v (cpuid 068xh) v
datasheet 39 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 3.0 signal quality specifications signals driven on the pentium iii processor system bus should meet signal quality specifications to ensure that the components read data properly and to ensure that incoming signals do not affect the long term reliability of the component. specifications are provided for simulation and measurement at the processor core; they should not be tested at the edge fingers. the agtl+ and non-agtl+ signal quality specifications listed in this section apply to pentium iii processors with cpuid=068xh. it is recommended that these specifications be used with pentium iii processors with cpuid=067xh, however any deviations from these guidelines must be verified with the specifications listed in the pentium ? ii processor developer's manual (order number 243502). 3.1 bclk, picclk, and pwrgood signal quality specifications and measurement guidelines table 19 describes the signal quality specifications at the processor core for the pentium iii processor system bus clock (bclk), apic clock (picclk), and pwrgood signals. figure 14 describes the signal quality waveform for the system bus clock at the processor core pins. notes: 1. unless otherwise noted, all specifications in this table apply to all pentium ? iii processor frequencies. 2. the rising and falling edge ringback voltage specified is the minimum (rising) or maximum (falling) absolute voltage the bclk signal can dip back to after passing the v ih (rising) or v il (falling) voltage limits. this specification is an absolute value. 3. the rising and falling edge ringback voltage specified is the minimum (rising) or maximum (falling) absolute voltage the picclk signal can dip back to after passing the v ih (rising) or v il (falling) voltage limits. this specification is an absolute value. table 19. bclk, picclk, and pwrgood signal quality specifications at the processor core 1 v# parameter min nom max unit figure notes v1: v in absolute voltage range C0.7 3.3 v 14 v2: rising edge ringback 2.0 v 14 2 v3: falling edge ringback 0.5 0.7 v v 14 14 2 3 figure 14. bclk and picclk generic clock waveform v2 v1 v3 v3 t6/t26 t5/t25 t4/t24 v4 v5 t3/t23
40 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 3.2 agtl+ and non-agtl+ overshoot/undershoot specifications and measurement guidelines overshoot/undershoot is the absolute value of the maximum voltage differential across the input buffer relative termination voltage (v tt ). the overshoot/undershoot guideline limits transitions beyond v tt or v ss due to the fast signal edge rates. the processor can be damaged by repeated overshoot/undershoot events on 1.5 v or 2.5 v tolerant buffers if the charge is large enough (i.e., if the overshoot/undershoot is great enough). determining the impact of an overshoot/undershoot condition requires knowledge of the magnitude, the pulse duration, and the activity factor. when performing simulations to determine impact of overshoot/undershoot, esd diodes must be properly characterized. esd protection diodes do not act as voltage clamps and will not provide overshoot/undershoot protection. esd diodes modeled within the intel provided pentium ? iii processor i/o buffer models do not clamp overshoot/undershoot and will yield correct simulation results. if other i/o buffer models are being used to characterize pentium ? iii processor performance, care must be taken to ensure that esd models do not clamp extreme voltage levels. the intel-provided pentium ? iii processor i/o buffer models also contains i/o capacitance characterization. therefore, removing the esd diodes from the i/o buffer model will impact results and may yield excessive overshoot/undershoot. 3.2.1 overshoot/undershoot magnitude overshoot/undershoot magnitude describes the maximum potential difference between a signal and its voltage reference level, v ss (overshoot) and v tt (undershoot). while overshoot can be measured relative to v ss using one probe (probe to signal - gnd lead to v ss ), undershoot must be measured relative to v tt . this could be accomplished by simultaneously measuring the v tt plane while measuring the signal undershoot. the true waveform can then be calculated by the oscilloscope itself or by the following oscilloscope date file analysis: converted undershoot waveform = v tt - signal_measured note: the converted undershoot waveform appears as a positive (overshoot) signal. note: overshoot (rising edge) and undershoot (falling edge) conditions are separate and their impact must be determined independently. after the conversion, the undershoot/overshoot specifications ( table 20 through table 22 ) can be applied to the converted undershoot waveform using the same magnitude and pulse duration specifications ( table 20 through table 22 ) as with an overshoot waveform. overshoot/undershoot magnitude levels must observe the absolute maximum specifications ( table 20 through table 22 ). these specifications must not be violated at any time regardless of bus activity or system state. within these specifications are threshold levels that define different allowed pulse durations. provided that the magnitude of the overshoot/undershoot is within the absolute maximum specifications, the impact of the overshoot/undershoot magnitude may be determined based upon the pulse duration and activity factor.
datasheet 41 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 3.2.2 overshoot/undershoot pulse duration overshoot/undershoot pulse duration describes the total time an overshoot/undershoot event exceeds the overshoot/undershoot reference voltage ( v os_ref = 1.635 v). the total time could encompass several oscillations above the reference voltage. multiple overshoot/undershoot pulses within a single overshoot/undershoot event may need to be measured to determine the total pulse duration. note: oscillations below the reference voltage can not be subtracted from the total overshoot/ undershoot pulse duration. note: multiple overshoot/undershoot events occurring within the same clock cycle must be considered together as one event. using the worst case overshoot/undershoot magnitude, sum together the individual pulse durations to determine the total overshoot/undershoot pulse duration for that total event. 3.2.3 overshoot/undershoot activity factor activity factor (af) describes the frequency of overshoot (or undershoot) occurrence relative to a clock. since the highest frequency of assertion of an agtl+ or a cmos signal is every other clock, an af = 1 indicates that the specific overshoot (or undershoot) waveform occurs every other clock cycle. thus, an af = 0.01 indicates that the specific overshoot (or undershoot) waveform occurs one time in every 200 clock cycles. the overshoot/undershoot specifications ( table 20 through table 22 ) show the maximum pulse duration allowed for a given overshoot/undershoot magnitude at a specific activity factor. each table entry is independent of all others, meaning that the pulse duration reflects the existence of overshoot/undershoot events of that magnitude only. a platform with an overshoot/undershoot that just meets the pulse duration for a specific magnitude where the af < 1, means that there can be no other overshoot/undershoot events, even of lesser magnitude (note that if af = 1, then the event occurs at all times and no other events can occur). note: overshoot (rising edge) and undershoot (falling edge) conditions are separate and their impact must be determined independently. note: activity factor for agtl+ signals is referenced to bclk frequency. note: activity factor for cmos signals is referenced to picclk frequency.
42 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 3.2.4 reading overshoot/undershoot specification tables the overshoot/undershoot specification for the pentium iii processor is not a simple single value. instead, many factors are needed to determine what the over/undershoot specification is. in addition to the magnitude of the overshoot, the following parameters must also be known: the width of the overshoot (as measured above 1.635 v) and the activity factor (af). to determine the allowed overshoot for a particular overshoot event, you must do the following: 1. determine the signal group that particular signal falls into. if the signal is an agtl+ signal operating with a 100 mhz system bus, use table 20 . if the signal is an agtl+ signal operating with a 133 mhz system bus, use table 21 . if the signal is a cmos signal, use table 22 . 2. determine the magnitude of the overshoot (relative to v ss ). 3. determine the activity factor (how often does this overshoot occur?). 4. from the appropriate specification table, read off the maximum pulse duration (in ns) allowed. 5. compare the specified maximum pulse duration to the signal being measured. if the pulse duration measured is less than the pulse duration shown in the table, then the signal meets the specifications. the above procedure is similar for undershoots after the undershoot waveform has been converted to look like an overshoot. undershoot events must be analyzed separately from overshoot events as they are mutually exclusive. below is an example showing how the maximum pulse duration is determined for a given waveform and how it relates to a measured value: platform information: ? signal group = 133 mhz agtl+ ? overshoot magnitude (measured) = 2.3 v ? pulse duration (measured) = 1.6 ns ? activity factor (measured) = 0.1 corresponding maximum pulse duration specification = 1.9 ns given the above parameters and using table 21 (af = 0.1 column), the maximum allowed pulse duration is 1.9 ns. since the measured pulse duration is 1.6 ns, this particular overshoot event passes the overshoot specifications, although this doesn't guarantee that the combined overshoot/ undershoot events meet the specifications.
datasheet 43 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 3.2.5 determining if a system meets the overshoot/undershoot specifications the overshoot/undershoot specifications ( table 20 through table 22 ) specify the allowable overshoot/undershoot for a single overshoot/undershoot event. however, most systems will have multiple overshoot and/or undershoot events that each have their own set of parameters (magnitude, duration, and af). while each overshoot on its own may meet the overshoot specification, when you add the total impact of all overshoot events, the system may exceed the specifications. a guideline to ensure a system passes the overshoot and undershoot specifications is shown below. 1. ensure no signal (agtl+ or 1.5 v non-agtl+) ever exceeds the 1.635 v or 2. if only one overshoot/undershoot event magnitude occurs, ensure it meets the over/undershoot specifications in the following tables. this means that whenever the over/undershoot event occurs, it always over/undershoots to the same level. or 3. if multiple overshoots and/or multiple undershoots occur, measure the worst case pulse duration for each magnitude and compare the results against the af = 1 specifications (note: multiple overshoot/undershoot events within one clock cycle must have their pulse durations summed together to determine the total pulse duration). if all of these worst case overshoot or undershoot events meet the specifications (measured time < specifications) in the table where af = 1, then the system passes. notes: 1. bclk period is 10 ns. 2. these values are specified at the processor core pins. 3. overshoot/undershoot magnitude = 2.3 v is an absolute value and should never be exceeded. 4. overshoot is measured relative to v ss , while undershoot is measured relative to v tt. 5. overshoot/undershoot pulse duration is measured relative to 1.635 v. table 20. 100 mhz agtl+ signal group overshoot/undershoot tolerance 1, 2, 3, 4, 5 overshoot/undershoot magnitude maximum pulse duration unit figure af = 0.01 af = 0.1 af = 1 2.3 v 20 2.53 0.25 ns 15 2.25 v 20 4.93 0.49 ns 15 2.2 v 20 9.1 0.91 ns 15 2.15 v 20 16.6 1.67 ns 15 2.1 v 20 20 3.0 ns 15 2.05 v 20 20 5.5 ns 15 2.0 v 20 20 10 ns 15
44 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz notes: 1. bclk period is 7.5 ns. 2. these values are specified at the processor core pins. 3. overshoot/undershoot magnitude = 2.3 v is an absolute value and should never be exceeded. 4. overshoot is measured relative to v ss , while undershoot is measured relative to v tt. 5. overshoot/undershoot pulse duration is measured relative to 1.635 v. notes: 1. picclk period is 30 ns. 2. this table applies to all 1.5 v tolerant non-agtl+ signals. bclk, picclk, and pwrgood are the only non- agtl+ signals that are 2.5 v tolerant at the processor core pins. 3. these values are specified at the processor core pins. 4. overshoot/undershoot magnitude = 2.3 v is an absolute value and should never be exceeded. 5. overshoot is measured relative to v ss , while undershoot is measured relative to v tt . 6. overshoot/undershoot pulse duration is measured relative to 1.635 v. table 21. 133 mhz agtl+ signal group overshoot/undershoot tolerance 1, 2, 3, 4, 5 overshoot/undershoot magnitude maximum pulse duration unit figure af = 0.01 af = 0.1 af = 1 2.3 v 15 1.9 0.19 ns 15 2.25 v 15 3.7 0.37 ns 15 2.2 v 15 6.8 0.68 ns 15 2.15 v 15 12.5 1.25 ns 15 2.1 v 15 15 2.28 ns 15 2.05 v 15 15 4.1 ns 15 2.0 v 15 15 7.5 ns 15 table 22. 33 mhz non-agtl+ signal group overshoot/undershoot tolerance 1, 2, 3, 4, 5, 6 overshoot/undershoot magnitude maximum pulse duration unit figure af = 0.01 af = 0.1 af = 1 2.3 v 60 7.6 0.76 ns 15 2.25 v 60 14.8 1.48 ns 15 2.2 v 60 27.2 2.7 ns 15 2.15 v 60 50 5 ns 15 2.1 v 60 60 9.1 ns 15 2.05 v 60 60 16.4 ns 15 2.0 v 60 60 30 ns 15
datasheet 45 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 3.3 agtl+ and non-agtl+ ringback specifications and measurement guidelines ringback refers to the amount of reflection seen after a signal has switched. the ringback specification is the voltage that the signal rings back to after achieving its maximum absolute value . (see figure 16 for an illustration of ringback.) excessive ringback can cause false signal detection or extend the propagation delay. the ringback specification applies to the input pin of each receiving agent. violations of the signal ringback specification are not allowed under any circumstances for both agtl+ and non-agtl+ signals. when performing simulations to determine the impact of ringback, esd diodes must be properly characterized. the intel provided pentium iii processor i/o buffer models contain i/o capacitance characterization. therefore, removing the esd diodes from the i/o buffer model will impact results and may yield incorrect ringback. if other i/o buffer models are being used to characterize pentium iii processor performance, care must be taken to ensure that esd models account for the i/o capacitance. see table 24 for the signal ringback specifications for both agtl+ and non-agtl+ signals for simulations at the processor core. figure 15. maximum acceptable agtl+ and non-agtl+ overshoot/undershoot waveform vss undershoot magnitude = v tt - signal overshoot magnitude = signal - vss v tt 2.3v 2.2v 2.1v 2.0v 1.635v max overshoot magnitude time dependent overshoot converted undershoot waveform undershoot magnitude time dependent undershoot
46 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all pentium ? iii processor frequencies and cache sizes. 2. non-agtl+ signals except pwrgood. there are three signal quality parameters defined for both agtl+ and non-agtl+ signals: overshoot/undershoot, ringback, and settling limit. all three signal quality parameters are shown in table 24 for the agtl+ and non-agtl+ signal group. notes: 1. unless otherwise noted, all specifications in this table apply to all pentium ? iii processor frequencies and cache sizes. 2. these values are specified at the processor core pins. 3. specifications are for the edge rate of 0.3 - 0.8 v / ns . see figure 16 for the generic waveform. 4. please see table 22 for maximum allowable overshoot. 5. ringback between v ref + 100 mv and v ref + 200 mv or v ref C200 mv and v ref C 100 mv requires the flight time measurements to be adjusted as described in the agtl+ specification ( pentium ? ii developers manual ). ringback below v ref + 100mv or above v ref C 100 mv is not supported. 6. intel recommends simulations not exceed a ringback value of v ref 200 mv to allow margin for other sources of system noise. 7. a negative value for r r indicates that the amplitude of ringback is above v ref . (i.e., f = -100 mv specifies the signal cannot ringback below v ref + 100 mv). 8. f f and r r : are measured relative to v ref . a a : is measured relative to v ref + 200 mv. table 23. signal ringback specifications for signal simulation 1 input signal group transition maximum ringback (with input diodes present) unit figure agtl+ 0 ? 1v ref + 0.200 v 16 agtl+ 1 ? 0v ref - 0.200 v 16 non-agtl+ signals 2 0 ? 11.7v16 non-agtl+ signals 2 1 ? 00.7v16 pwrgood 0 ? 12.00v16 table 24. agtl+ and non-agtl+ signal groups ringback tolerance specifications 1, 2, 3, 4 t# parameter min unit figure notes a a : overshoot 100 mv 14 4, 8 t t : minimum time at high 0.50 ns 14 r r : amplitude of ringback C200 mv 14 5, 6, 7, 8 f f : final settling voltage 200 mv 14 8 d d : duration of squarewave ringback n/a ns 14
datasheet 47 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 3.3.1 settling limit guideline settlin g limit defines the maximum amount of rin g in g at the receivin g p in that a si g nal must reach before its next transition. the amount allowed is 10 p ercent of the total si g nal swin g (v hi - v lo ) above and below its final value. a si g nal should be within the settlin g limits of its final value, when either in its hi g h state or low state, before it transitions a g ain. si g nals that are not within their settlin g limit before transitionin g are at risk of unwanted oscillations which could j eo p ardize si g nal inte g rit y . simulations to verif y settlin g limit ma y be done either with or without the in p ut p rotection diodes p resent. violation of the settlin g limit g uideline is acce p table if simulations of 5 to 10 successive transitions do not show the am p litude of the rin g in g increasin g in the subse q uent transitions. figure 16. low to high agtl+ and non-agtl+ receiver ringback tolerance figure 17. signal overshoot/undershoot, settling limit, and ringback 1 0.7v clk ref clock time v start v ref - 0.2 v ref v ref + 0.2 note: high to low case is analogous t a d r f undershoot overshoot settling limit settling limit rising-edge ringback falling-edge ringback v lo v ss time 000767 v hi
48 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 4.0 thermal specifications and design considerations limited quantities of pentium iii processors utilize s.e.c.c. package technology. this technology uses an extended thermal plate for heatsink attachment. the extended thermal plate interface is intended to provide accessibility for multiple types of thermal solutions. the majority of sc242- based pentium iii processors use s.e.c.c.2 packaging technology. s.e.c.c.2 package technology does not incorporate an extended thermal plate. this chapter provides needed data for designing a thermal solution. however, for the correct thermal measuring processes please refer to ap-905, pentium ? iii processor thermal design guidelines (order number 245087). figure 18 provides a 3-dimensional view of an s.e.c.c. package. this figure illustrates the thermal plate location. figure 19 provides a substrate view of an s.e.c.c.2 package. figure 18. s.e.c.cartridge 3-dimensional view right latch left latch cover extended thermal plate
datasheet 49 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 4.1 thermal specifications table 25 and table 26 provide the thermal design power dissipation and maximum and minimum temperatures for pentium iii processors with s.e.c.c. and s.e.c.c.2 package technologies respectively. while the processor core dissipates the majority of the thermal power, thermal power dissipated by the l2 cache also impacts the overall processor power specification. this total thermal power is referred to as processor power in the following specifications. systems should design for the highest possible processor power, even if a processor with a lower thermal dissipation is planned. notes: 1. these values are specified at nominal v cc core for the processor core and nominal v cc l2 /v cc 3.3 for the l2 cache (if applicable). 2. processor power includes the power dissipated by the processor core, the l2 cache, and the agtl + bus termination. the maximum power for each of these components does not occur simultaneously. 3. extended thermal plate power is the processor power that is dissipated through the extended thermal plate. figure 19. s.e.c.cartridge 2 substrate view substrate view olga package l2 cache (cpuid 067xh only table 25. thermal specifications for s.e.c.c. packaged processors 1 processor core frequency (mhz) l2 cache size (kbs) processor power 2 (w) extended thermal plate power 3 (w) min t plate (c) max t plate (c) min t cover (c) max t cover (c) 450 512 25.3 25.5 5 70 5 75 500 512 28.0 28.2 5 70 5 75
50 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz notes: 1. these values are specified at nominal v cc core for the processor core and nominal v cc l2 /v cc 3.3 for the l2 cache (if applicable). 2. thermal design power (tdp) represents the maximum amount of power the thermal solution is required to dissipate. the thermal solution should be designed to dissipate the tdp without exceeding the maximum tjunction specification. tdp does not represent the power delivery and voltage regulation requirements for the processor. 3. t junctionoffset is the worst-case difference between the thermal reading from the on-die thermal diode and the hottest location on the processors core. 4. power density is the maximum power the processor die can dissipate (i.e. processor power) divided by the die area over which the power is generated. 5. power for these processors is generated over the entire processor die (see figure 40 for processor die dimensions). 6. power for these processors is generated over the core area (see figure 20 for processor die and core area dimensions). thermal solution designs should compensate for this smaller heat flux area (core) and not assume that the power is uniformly distributed across the entire die area (core + cache). 7. t junction offset values do not include any thermal diode kit measurement error. diode kit measurement error must be added to the t junction offset value from the table, as outlined in the intel ? pentium ? iii processor thermal metrology for cpuid-068h family processors . intel has characterized the use of the analog devices ad1021 diode measurement kit and found its measurement error to be 1 c. 8. this specification applies to the pentium ? iii processor with cpuid=0683h operating at 1.0 ghz. table 26. thermal specifications for s.e.c.c.2 packaged processors 1 proc. core freq. (mhz) l2 cache size (kbytes) thermal design power 2 (w) l2 cache power (w) power density 4 (w/cm 2 ) max t junction (c) t junction offset 3 (c) l2 cache min t case (c) l2 cache max t case (c) min t cover (c) max t cover (c) 450 512 25.3 1.26 21.6 5 90 4.8 5 105 5 75 500 512 28.0 1.33 23.9 5 90 4.8 5 105 5 75 533b 512 29.7 1.37 25.4 5 90 4.8 5 105 5 75 533eb 256 14.0 n/a 19.3 6 82 2.6 7 n/a n/a 5 75 550 512 30.8 1.37 26.3 5 80 4.8 5 105 5 75 550e 256 14.5 n/a 20.0 6 82 2.6 7 n/a n/a 5 75 600 512 34.5 1.60 29.5 5 85 4.8 5 105 5 75 600b 512 34.5 1.60 29.5 5 85 4.8 5 105 5 75 600e 256 15.8 n/a 21.8 6 82 2.9 7 n/a n/a 5 75 600eb 256 15.8 n/a 21.8 6 82 2.9 7 n/a n/a 5 75 650 256 17.0 n/a 23.4 6 82 3.1 7 n/a n/a 5 75 667 256 17.5 n/a 24.1 6 82 3.2 7 n/a n/a 5 75 700 256 18.3 n/a 25.2 6 80 3.3 7 n/a n/a 5 75 733 256 19.1 n/a 26.3 6 80 3.5 7 n/a n/a 5 75 750 256 19.5 n/a 26.9 6 80 3.7 7 n/a n/a 5 75 800 256 20.8 n/a 28.7 6 80 3.8 7 n/a n/a 5 75 800eb 256 20.8 n/a 28.7 6 80 3.8 7 n/a n/a 5 75 850 256 22.5 n/a 31.0 6 80 3.9 7 n/a n/a 5 75 866 256 22.9 n/a 31.5 6 80 3.9 7 n/a n/a 5 75 933 256 25.5 n/a 35.1 6 75 3.7 n/a n/a 5 75 1.0b ghz 256 33 n/a 45.5 6 60 4.7 7,8 n/a n/a 5 75
datasheet 51 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz for s.e.c.c. packaged processors, the extended thermal plate is the attach location for all thermal solutions. the maximum and minimum extended thermal plate temperatures are specified in table 25 . for s.e.c.c.2 packaged processors, thermal solutions attach to the processor by connecting through the substrate to the cover. the maximum and minimum temperatures of the pertinent locations are specified in table 26 . a thermal solution should be designed to ensure the temperature of the specified locations never exceeds these temperatures. the total processor power is a result of heat dissipated by the processor core and l2 cache. the overall system chassis thermal design must comprehend the entire processor power. in s.e.c.c. packaged processors, the extended thermal plate power is a component of this power, and is primarily composed of the processor core and the l2 cache dissipating heat through the extended thermal plate. the heatsink need only be designed to dissipate the extended thermal plate power. see table 25 for current pentium iii processor s.e.c.c. thermal design specifications. no extended thermal plate exists for s.e.c.c.2 packaged processors, so thermal solutions have to attach directly to the processor core package. the total processor power dissipated by an s.e.c.c.2 processor is a combination of heat dissipated by both the processor core and l2 cache. pentium iii processors that use a discrete l2 cache have a separate t case specification ( table 26 ) for the surface mounted bsram components on the substrate. t junction encompasses the l2 cache for processors that utilize the advanced transfer cache, therefore no separate cache measurement is required. specifics on how to measure these specifications are outlined in ap-905, pentium ? iii processor thermal design guidelines (order number 245087). figure 20. processor functional die layout (cpuid 068xh) cache area 0.05 in 2 0.362 0.292 0.170 0.448 core area 0.11 in 2 die area 0.16 in 2 die area = 1.05 cm 2 cache area = 0.32 cm 2 core area = 0.73 cm 2
52 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 4.1.1 thermal diode the pentium iii processor incorporates an on-die diode that may be used to monitor the die temperature (junction temperature). a thermal sensor located on the baseboard, or a stand-alone measurement kit, may monitor the die temperature of the pentium iii processor for thermal management or instrumentation purposes. table 27 and table 28 provide the diode parameter and interface specifications. notes: 1. intel does not support or recommend operation of the thermal diode under reverse bias. 2. at room temperature with a forward bias of 630 mv. 3. n_ideality is the diode ideality factor parameter, as represented by the diode equation: i=io(e (vd*q)/(nkt) - 1). 4. this specification applies to the pentium ? iii processor with cpuid=067xh. 5. this specification applies to the pentium ? iii processor with cpuid=068xh. table 27. thermal diode parameters 1 symbol min typ max unit notes i forward bias 5 500 ua 1 n_ideality 1.0000 1.0057 1.0065 1.0080 1.0173 1.0125 2, 3, 4 2, 3, 5 table 28. thermal diode interface pin name sc 242 connector signal # pin description thermdp b14 diode anode (p_junction) thermdn b15 diode cathode (n_junction)
datasheet 53 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 5.0 s.e.c.c. and s.e.c.c.2 mechanical specifications intel ? pentium ? iii processors use either s.e.c.c. or s.e.c.c.2 package technology. both package types contain the processor core, l2 cache, and other passive components. the cartridges connect to the baseboard through an edge connector. mechanical specifications for the processor are given in this section. see section 1.1.1 for a complete terminology listing. 5.1 s.e.c.c. mechanical specifications s.e.c.c. package drawings and dimension details are provided in figure 21 through figure 30 . figure 21 shows multiple views of the pentium iii processor in an s.e.c.c. package; figure 22 through figure 25 show the package dimensions; figure 26 and figure 27 show the extended thermal plate dimensions; and figure 28 and figure 29 provide details of the processor substrate edge finger contacts. figure 30 and table 29 contain processor marking information. see section 5.2 for s.e.c.c.2 mechanical specifications. the processor edge connector defined in this document is referred to as the sc242 connector. see the slot 1 connector specification (order number 243397) for further details on the sc242 connector. note: for figure 21 through figure 43 , the following apply: 1. unless otherwise specified, the following drawings are dimensioned in inches. 2. all dimensions provided with tolerances are guaranteed to be met for all normal production product. 3. figures and drawings labeled as reference dimensions are provided for informational purposes only. reference dimensions are extracted from the mechanical design database and are nominal dimensions with no tolerance information applied. reference dimensions are not checked as part of the processor manufacturing. unless noted as such, dimensions in parentheses without tolerances are reference dimensions. 4. drawings are not to scale. figure 21. s.e.c.c. packaged processor multiple views left right right side left right thermal plate side view cover side view top view left latch right latch cover thermal plate
54 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 22. s.e.c.c. packaged processor extended thermal plate side dimensions figure 23. s.e.c.c. packaged processor bottom view dimensions 005 2.473.016 2.070.020 1.235.020 these dimensions are from the bottom of the substrate edge fingers 2x .365.005 1.745.005 1.877.020 2x .342.005 2x .125.005 3.805.020 (0.750) (1.500) 5.505.010 5.341.010 3.243.015 2.181.015 thermal plate 5.255.006 cover
datasheet 55 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 24. s.e.c.c. packaged processor latch arm, extended thermal plate lug, and cover lug dimensions 001056a 2x 0.174 0.005 2x 0.488 0.020 2x 0.238 2x 0.103 0.005 2x 0.647 0.020 2x 0.253 2x 0.058 0.005 2x 0.136 0.005 left 2x 0.136 0.005 2x0.103 0.005
56 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 25. s.e.c.c. packaged processor latch arm, extended thermal plate, and cover detail dimensions (reference dimensions only) 0.236 0.113 detail a detail b (bottom side view) 0.084 0.122 0.075 detail c detail d detail e 001057a note: all dimensions without tolerance information are considered reference dimensions only 0.120 min. 0.082 0.316 0.116 0.291 45 0.276 0.216
datasheet 57 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 26. s.e.c.c. packaged processor extended thermal plate attachment detail dimensions detail a 6x 0.124 +0.001 C0.002 8x r 0.0625 0.002 4x 0.365 0.005 see detail a 2.110 0.008 0.000 0.978 0.008 0.500 0.008 0.250 0.008 0.000 0.375 0.008
58 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 27. s.e.c.c. packaged processor extended thermal plate attachment detail dimensions, continued figure 28. s.e.c.c. packaged processor substrate edge finger contact dimensions v008 2.500 1.250 0.0032 / 1.000 x 1.000 .062 +.007 -.005 .045 70 2.01 .008 2.992 .008 2.835 1.85 5.000 w note: all dimensions without tolerance information are considered reference dimensions only. see detail a in next figure z x y substrate cover thermal plate pin a121 pin a1 007.vsd
datasheet 59 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 29. s.e.c.c. packaged processor substrate edge finger contact dimensions, detail a figure 30. intel ? pentium ? iii processor markings (s.e.c.c. packaged processor) .098 .098 .039 .037 .074 .002 .236 .045 121 x 0.043 .002 .138 .005 .008 .360 .010 121 x 0.16 .002 y pin a73 pin a74 note: 1. all dimensions without tolerance information are considered reference dimensions only. .008 z w .002 z .008 z w .002 z w !!! hologram loation k pentium ? see note note: please refer to the intel ? pentium ? iii processor specification update for this information
60 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 5.2 s.e.c.c.2 mechanical specification s.e.c.c.2 drawings and dimension details are provided in figure 31 through figure 43 . figure 31 shows multiple views of the pentium iii processor in an s.e.c.c.2 package; figure 32 through figure 36 show an s.e.c.c.2 package dimensions; figure 37 and figure 38 provide dimensions of the processor substrate edge finger contacts; figure 39 shows the heatsink solution keep-in zone; figure 41 shows multiple views of an s.e.c.c.2 packaged processor keep-out zone; and figure 43 and table contain processor marking information. see section 5.1 for s.e.c.c. mechanical specifications. table 29. description table for processor markings (s.e.c.c. packaged processor) code letter description a logo c trademark d logo e product name f dynamic mark area C with 2-d matrix figure 31. s.e.c.c.2 packaged processor multiple views top view cover side view right side view substrate view olga package cover l2 cache (cpuid 067xh only pentium ? !!!
datasheet 61 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 32. s.e.c.c.2 packaged processor assembly primary view figure 33. s.e.c.c.2 packaged processor assembly cover view with dimensions plga olga l2 cache (cpuid 067xh only 0.725 0.13 0.954 0.13 cpuid 067xh 0.685 0.13 0.954 0.13 cpuid 068xh pl ga ol ga 5.000 0.016 1.546 0.013 4.918 0.006 1.849 0.010 0.615 0.013 2.440 0.005 .021 +.015 -.012 olga +.015 -.012 .017 cpuid 067xh = cpuid 068xh =
62 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 34. s.e.c.c.2 packaged processor assembly heat sink attach boss section figure 35. s.e.c.c.2 packaged processor assembly side view figure 36. detail view of cover in the vicinity of the substrate attach features dimensions in inches 0.020 0.010 0.062 +0.007 -0.005 cover 82.0 5.0 0.283 0.154 0.100 substrate f 0.005 f 0.112 0.001 f 0.025 0.001 2id i olga core package tqfp bs ram package (067xh) 0.129 0.025 0.365 0.025 y z olga cpuid 067xh = 0.094" 0.005" cpuid 068xh = 0.090" 0.005" 0.061 0.005 see figure 36 dimensions in inches dimensions in inches 0.340 0.280 0.075 -z-
datasheet 63 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 37. s.e.c.c.2 packaged processor substrate edge finger contact dimensions figure 38. s.e.c.c.2 packaged processor substrate edge finger contact dimensions (detail a) .045 +.007 .062 -.005 .039 .037 .074 .002 .236 .045 121 x 0.043 .002 .138 .005 .008 .360 .010 121 x 0.16 .002 y pin a73 pin a74 note: 1. all dimensions without tolerance information are considered reference dimensions only. .008 z w .002 z .008 z w .002 z w
64 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 39. s.e.c.c.2 packaged processor substrate (cpuid 067xh) keep in zones figure 40. s.e.c.c.2 packaged processor substrate (cpuid 068xh) keep in zones typ max non-keepout area .0275 .448 .405 primary side non-keepout area typ max non-keepout area .0275 .363 .440 primary side non-keepout area ..632 0.448 keep out zone ( front side view )
datasheet 65 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 41. s.e.c.c.2 packaged processor substrate (cpuid 067xh) keep-out zone figure 42. s.e.c.c.2 packaged processor substrate (cpuid 068xh) keep-out zone keep out zone (bottom side view) .440 .363 keep out zone (front side view) keep out zone (bottom side view) .448 .362
66 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 5.3 s.e.c.c.2 structural mechanical specification the intention of the structural specification for s.e.c.c.2 is to ensure that the package will not be exposed to excessive stresses that could adversely affect device reliability. figure 44 illustrates the deflection specification for deflections away from the heatsink. figure 45 illustrates the deflection specification in the direction of the heatsink. the heatsink attach solution must not induce permanent stress into the s.e.c.c.2 substrate with the exception of a uniform load to maintain the heatsink to the processor thermal interface. figure 46 and table 31 define the pressure specification. figure 43. intel ? pentium ? iii processor markings (s.e.c.c.2 package) table 30. description table for processor markings (s.e.c.c.2 packaged processor) code letter description a logo c trademark d logo f dynamic mark area C with 2-d matrix note: please refer to the pentium ? iii processor specification update for this information. d f """" " """ "" " """"" " " " " """ " " " """" """" "" """ "" " " " " "" " " " """" " " " " "" """ " "" """ " " "" "" " "" " "" " " " """"" "" " " " "" " figure 44. substrate deflection away from heat sink f/2 f/2 5 cycles maximum 0.025 processor substrate
datasheet 67 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz notes: 1. this is the maximum static force that can be applied by the heatsink to maintain the heatsink and processor interface. 2. this specification applies to a uniform load. 3. this specification applies to a nonuniform load. figure 45. substrate deflection toward the heatsink figure 46. s.e.c.c.2 packaged processor specifications table 31. s.e.c.c.2 pressure specifications parameter maximum unit figure notes static compressive force 50 lbf 46 1 transient compressive force 100 75 lbf lbf 46 46 2 3 f f/2 .160 in. max. deflection 30 seconds maximum 10 cycles maximum f/2 0.050 processor substrate f 2 f . 080 in . max . defle 30 seconds maxi m 5 cycles maximu m
68 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 5.4 processor package materials information both the s.e.c.c. and s.e.c.c.2 processor packages are comprised of multiple pieces to make the complete assembly. this section provides the weight of each piece and the entire package. table 32 and table 33 contain piece-part information of the s.e.c.c. and s.e.c.c.2 processor packages, respectively. 5.5 intel ? pentium ? iii processor signal listing table 34 and table 35 provide the processor edge finger signal definitions. the signal locations on the sc242 edge connector are to be used for signal routing, simulation, and component placement on the baseboard. table 34 is the pentium iii processor substrate edge finger listing in order by pin number. table 32. s.e.c.c. materials s.e.c.c. piece piece material maximum piece weight (grams) extended thermal plate aluminum 6063-t6 84.0 latch arms ge lexan 940-v0, 30% glass filled less than 2.0 per latch arm cover ge lexan 940-v0 24.0 total pentium ? iii processor 112.0 table 33. s.e.c.c.2 materials s.e.c.c.2 piece piece material maximum piece weight (grams) cover ge lexan 940-v0 18.0 total pentium ? iii processor 54.0
datasheet 69 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz table 34. signal listing in order by pin number (sheet 1 of 4) pin no. pin name signal group pin no. pin name signal group a1 v tt power/other b1 emi power/other a2 gnd power/other b2 flush# cmos input a3 v tt power/other b3 smi# cmos input a4 ierr# cmos output b4 init# cmos input a5 a20m# cmos input b5 v tt power/other a6 gnd power/other b6 stpclk# cmos input a7 ferr# cmos output b7 tck tap input a8 ignne# cmos input b8 slp# cmos input a9 tdi tap input b9 v tt power/other a10 gnd power/other b10 tms tap input a11 tdo tap output b11 trst# tap input a12 pwrgood cmos input b12 reserved power/other a13 testhi power/other b13 v cc core power/other a14 bsel1 power/other b14 thermdp power/other a15 thermtrip# cmos output b15 thermdn power/other a16 reserved power/other b16 lint1/nmi cmos input a17 lint0/intr cmos input b17 v cc core power/other a18 gnd power/other b18 picclk apic clock a19 picd0 apic i/o b19 bp2# agtl+ i/o a20 preq# cmos input b20 reserved power/other a21 bp3# agtl+ i/o b21 bsel0 power/other a22 gnd power/other b22 picd1 apic i/o a23 bpm0# agtl+ i/o b23 prdy# agtl+ output a24 binit# agtl+ i/o b24 bpm1# agtl+ i/o a25 dep0# agtl+ i/o b25 v cc core power/other a26 gnd power/other b26 dep2# agtl+ i/o a27 dep1# agtl+ i/o b27 dep4# agtl+ i/o a28 dep3# agtl+ i/o b28 dep7# agtl+ i/o a29 dep5# agtl+ i/o b29 v cc core power/other a30 gnd power/other b30 d62# agtl+ i/o a31 dep6# agtl+ i/o b31 d58# agtl+ i/o a32 d61# agtl+ i/o b32 d63# agtl+ i/o a33 d55# agtl+ i/o b33 v cc core power/other a34 gnd power/other b34 d56# agtl+ i/o a35 d60# agtl+ i/o b35 d50# agtl+ i/o a36 d53# agtl+ i/o b36 d54# agtl+ i/o a37 d57# agtl+ i/o b37 v cc core power/other
70 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz a38 gnd power/other b38 d59# agtl+ i/o a39 d46# agtl+ i/o b39 d48# agtl+ i/o a40 d49# agtl+ i/o b40 d52# agtl+ i/o a41 d51# agtl+ i/o b41 emi power/other a42 gnd power/other b42 d41# agtl+ i/o a43 d42# agtl+ i/o b43 d47# agtl+ i/o a44 d45# agtl+ i/o b44 d44# agtl+ i/o a45 d39# agtl+ i/o b45 v cc core power/other a46 gnd power/other b46 d36# agtl+ i/o a47 reserved power/other b47 d40# agtl+ i/o a48 d43# agtl+i/o b48 d34# agtl+ i/o a49 d37# agtl+ i/o b49 v cc core power/other a50 gnd power/other b50 d38# agtl+ i/o a51 d33# agtl+ i/o b51 d32# agtl+ i/o a52 d35# agtl+ i/o b52 d28# agtl+ i/o a53 d31# agtl+ i/o b53 v cc core power/other a54 gnd power/other b54 d29# agtl+ i/o a55 d30# agtl+ i/o b55 d26# agtl+ i/o a56 d27# agtl+ i/o b56 d25# agtl+ i/o a57 d24# agtl+ i/o b57 v cc core power/other a58 gnd power/other b58 d22# agtl+ i/o a59 d23# agtl+ i/o b59 d19# agtl+ i/o a60 d21# agtl+ i/o b60 d18# agtl+ i/o a61 d16# agtl+ i/o b61 emi power/other a62 gnd power/other b62 d20# agtl+ i/o a63 d13# agtl+ i/o b63 d17# agtl+ i/o a64 d11# agtl+ i/o b64 d15# agtl+ i/o a65 d10# agtl+ i/o b65 v cc core power/other a66 gnd power/other b66 d12# agtl+ i/o a67 d14# agtl+ i/o b67 d7# agtl+ i/o a68 d9# agtl+ i/o b68 d6# agtl+ i/o a69 d8# agtl+ i/o b69 v cc core power/other a70 gnd power/other b70 d4# agtl+ i/o a71 d5# agtl+ i/o b71 d2# agtl+ i/o a72 d3# agtl+ i/o b72 d0# agtl+ i/o a73 d1# agtl+ i/o b73 v cc core power/other a74 gnd power/other b74 reset# agtl+ input a75 bclk system bus b75 br1# agtl+ input table 34. signal listing in order by pin number (sheet 2 of 4) pin no. pin name signal group pin no. pin name signal group
datasheet 71 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz a76 br0# agtl+i/o b76 reserved power/other. a77 berr# agtl+ i/o b77 v cc core power/other a78 gnd power/other b78 a35# agtl+ i/o a79 a33# agtl+ i/o b79 a32# agtl+ i/o a80 a34# agtl+ i/o b80 a29# agtl+ i/o a81 a30# agtl+ i/o b81 emi power/other a82 gnd power/other b82 a26# agtl+ i/o a83 a31# agtl+ i/o b83 a24# agtl+ i/o a84 a27# agtl+ i/o b84 a28# agtl+ i/o a85 a22# agtl+ i/o b85 v cc core power/other a86 gnd power/other b86 a20# agtl+ i/o a87 a23# agtl+ i/o b87 a21# agtl+ i/o a88 reserved power/other b88 a25# agtl+ i/o a89 a19# agtl+ i/o b89 v cc core power/other a90 gnd power/other b90 a15# agtl+ i/o a91 a18# agtl+ i/o b91 a17# agtl+ i/o a92 a16# agtl+ i/o b92 a11# agtl+ i/o a93 a13# agtl+ i/o b93 v cc core power/other a94 gnd power/other b94 a12# agtl+ i/o a95 a14# agtl+ i/o b95 a8# agtl+ i/o a96 a10# agtl+ i/o b96 a7# agtl+ i/o a97 a5# agtl+ i/o b97 v cc core power/other a98 gnd power/other b98 a3# agtl+ i/o a99 a9# agtl+ i/o b99 a6# agtl+ i/o a100 a4# agtl+ i/o b100 emi power/other a101 bnr# agtl+ i/o b101 slotocc# power/other a102 gnd power/other b102 req0# agtl+ i/o a103 bpri# agtl+ input b103 req1# agtl+ i/o a104 trdy# agtl+ input b104 req4# agtl+ i/o a105 defer# agtl+ input b105 v cc core power/other a106 gnd power/other b106 lock# agtl+ i/o a107 req2# agtl+ i/o b107 drdy# agtl+ i/o a108 req3# agtl+ i/o b108 rs0# agtl+ input a109 hitm# agtl+ i/o b109 v cc 5 power/other a110 gnd power/other b110 hit# agtl+ i/o a111 dbsy# agtl+ i/o b111 rs2# agtl+ input a112 rs1# agtl+ input b112 reserved power/other a113 reserved power/other b113 v cc l2 /v cc 3.3 power/other table 34. signal listing in order by pin number (sheet 3 of 4) pin no. pin name signal group pin no. pin name signal group
72 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz table 35 is the pentium iii processor substrate edge connector listing in order by signal name. a114 gnd power/other b114 rp# agtl+ i/o a115 ads# agtl+ i/o b115 rsp# agtl+ input a116 reserved power/other b116 ap1# agtl+ i/o a117 ap0# agtl+ i/o b117 v cc l2 /v cc 3.3 power/other a118 gnd power/other b118 aerr# agtl+ i/o a119 vid2 power/other b119 vid3 power/other a120 vid1 power/other b120 vid0 power/other a121 vid4 power/other b121 v cc l2 /v cc 3.3 power/other table 34. signal listing in order by pin number (sheet 4 of 4) pin no. pin name signal group pin no. pin name signal group
datasheet 73 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz table 35. signal listing in order by signal name (sheet 1 of 8) pin no. pin name signal group b98 a3# agtl+ i/o a100 a4# agtl+ i/o a97 a5# agtl+ i/o b99 a6# agtl+ i/o b96 a7# agtl+ i/o b95 a8# agtl+ i/o a99 a9# agtl+ i/o a96 a10# agtl+ i/o b92 a11# agtl+ i/o b94 a12# agtl+ i/o a93 a13# agtl+ i/o a95 a14# agtl+ i/o b90 a15# agtl+ i/o a92 a16# agtl+ i/o b91 a17# agtl+ i/o a91 a18# agtl+ i/o a89 a19# agtl+ i/o b86 a20# agtl+ i/o a5 a20m# cmos input b87 a21# agtl+ i/o a85 a22# agtl+ i/o a87 a23# agtl+ i/o b83 a24# agtl+ i/o b88 a25# agtl+ i/o b82 a26# agtl+ i/o a84 a27# agtl+ i/o b84 a28# agtl+ i/o b80 a29# agtl+ i/o a81 a30# agtl+ i/o a83 a31# agtl+ i/o b79 a32# agtl+ i/o a79 a33# agtl+ i/o a80 a34# agtl+ i/o b78 a35# agtl+ i/o a115 ads# agtl+ i/o b118 aerr# agtl+ i/o a117 ap0# agtl+ i/o b116 ap1# agtl+ i/o a75 bclk system bus a77 berr# agtl+ i/o a24 binit# agtl+ i/o a101 bnr# agtl+ i/o b19 bp2# agtl+ i/o a21 bp3# agtl+ i/o a23 bpm0# agtl+ i/o b24 bpm1# agtl+ i/o a103 bpri# agtl+ input a76 br0# agtl+i/o b75 br1# agtl+ input b21 bsel0 power/other a14 bsel1 power/other b72 d0# agtl+ i/o a73 d1# agtl+ i/o b71 d2# agtl+ i/o a72 d3# agtl+ i/o b70 d4# agtl+ i/o a71 d5# agtl+ i/o b68 d6# agtl+ i/o b67 d7# agtl+ i/o a69 d8# agtl+ i/o a68 d9# agtl+ i/o a65 d10# agtl+ i/o a64 d11# agtl+ i/o b66 d12# agtl+ i/o a63 d13# agtl+ i/o a67 d14# agtl+ i/o b64 d15# agtl+ i/o a61 d16# agtl+ i/o b63 d17# agtl+ i/o b60 d18# agtl+ i/o b59 d19# agtl+ i/o b62 d20# agtl+ i/o a60 d21# agtl+ i/o b58 d22# agtl+ i/o table 35. signal listing in order by signal name (sheet 2 of 8) pin no. pin name signal group
74 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz a59 d23# agtl+ i/o a57 d24# agtl+ i/o b56 d25# agtl+ i/o b55 d26# agtl+ i/o a56 d27# agtl+ i/o b52 d28# agtl+ i/o b54 d29# agtl+ i/o a55 d30# agtl+ i/o a53 d31# agtl+ i/o b51 d32# agtl+ i/o a51 d33# agtl+ i/o b48 d34# agtl+ i/o a52 d35# agtl+ i/o b46 d36# agtl+ i/o a49 d37# agtl+ i/o b50 d38# agtl+ i/o a45 d39# agtl+ i/o b47 d40# agtl+ i/o b42 d41# agtl+ i/o a43 d42# agtl+ i/o a48 d43# agtl+i/o b44 d44# agtl+ i/o a44 d45# agtl+ i/o a39 d46# agtl+ i/o b43 d47# agtl+ i/o b39 d48# agtl+ i/o a40 d49# agtl+ i/o b35 d50# agtl+ i/o a41 d51# agtl+ i/o b40 d52# agtl+ i/o a36 d53# agtl+ i/o b36 d54# agtl+ i/o a33 d55# agtl+ i/o b34 d56# agtl+ i/o a37 d57# agtl+ i/o b31 d58# agtl+ i/o b38 d59# agtl+ i/o table 35. signal listing in order by signal name (sheet 3 of 8) pin no. pin name signal group a35 d60# agtl+ i/o a32 d61# agtl+ i/o b30 d62# agtl+ i/o b32 d63# agtl+ i/o a111 dbsy# agtl+ i/o a105 defer# agtl+ input a25 dep0# agtl+ i/o a27 dep1# agtl+ i/o b26 dep2# agtl+ i/o a28 dep3# agtl+ i/o b27 dep4# agtl+ i/o a29 dep5# agtl+ i/o a31 dep6# agtl+ i/o b28 dep7# agtl+ i/o b107 drdy# agtl+ i/o b1 emi power/other b41 emi power/other b61 emi power/other b81 emi power/other b100 emi power/other a7 ferr# cmos output b2 flush# cmos input a2 gnd power/other a6 gnd power/other a10 gnd power/other a18 gnd power/other a22 gnd power/other a26 gnd power/other a30 gnd power/other a34 gnd power/other a38 gnd power/other a42 gnd power/other a46 gnd power/other a50 gnd power/other a54 gnd power/other a58 gnd power/other a62 gnd power/other table 35. signal listing in order by signal name (sheet 4 of 8) pin no. pin name signal group
datasheet 75 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz a66 gnd power/other a70 gnd power/other a74 gnd power/other a78 gnd power/other a82 gnd power/other a86 gnd power/other a90 gnd power/other a94 gnd power/other a98 gnd power/other a102 gnd power/other a106 gnd power/other a110 gnd power/other a114 gnd power/other a118 gnd power/other b110 hit# agtl+ i/o a109 hitm# agtl+ i/o a4 ierr# cmos output a8 ignne# cmos input b4 init# cmos input a17 lint0/intr cmos input b16 lint1/nmi cmos input b106 lock# agtl+ i/o b18 picclk apic clock a19 picd0 apic i/o b22 picd1 apic i/o b23 prdy# agtl+ output a20 preq# cmos input a12 pwrgood cmos input b102 req0# agtl+ i/o b103 req1# agtl+ i/o a107 req2# agtl+ i/o a108 req3# agtl+ i/o b104 req4# agtl+ i/o a16 reserved power/other a47 reserved power/other a88 reserved power/other a113 reserved power/other table 35. signal listing in order by signal name (sheet 5 of 8) pin no. pin name signal group a116 reserved power/other b12 reserved power/other b20 reserved power/other b76 reserved power/other. b112 reserved power/other b74 reset# agtl+ input b114 rp# agtl+ i/o b108 rs0# agtl+ input a112 rs1# agtl+ input b111 rs2# agtl+ input b115 rsp# agtl+ input b101 slotocc# power/other b8 slp# cmos input b3 smi# cmos input b6 stpclk# cmos input b7 tck tap input a9 tdi tap input a11 tdo tap output a13 testhi power/other b15 thermdn power/other b14 thermdp power/other a15 thermtrip# cmos output b10 tms tap input a104 trdy# agtl+ input b11 trst# tap input b109 v cc 5 power/other b13 v cc core power/other b17 v cc core power/other b25 v cc core power/other b29 v cc core power/other b33 v cc core power/other b37 v cc core power/other b45 v cc core power/other b49 v cc core power/other b53 v cc core power/other b57 v cc core power/other b65 v cc core power/other table 35. signal listing in order by signal name (sheet 6 of 8) pin no. pin name signal group
76 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz b69 v cc core power/other b73 v cc core power/other b77 v cc core power/other b85 v cc core power/other b89 v cc core power/other b93 v cc core power/other b97 v cc core power/other b105 v cc core power/other b113 v cc l2 power/other b117 v cc l2 power/other table 35. signal listing in order by signal name (sheet 7 of 8) pin no. pin name signal group b121 v cc l2 power/other b120 vid0 power/other a120 vid1 power/other a119 vid2 power/other b119 vid3 power/other a121 vid4 power/other a1 v tt power/other a3 v tt power/other b5 v tt power/other b9 v tt power/other table 35. signal listing in order by signal name (sheet 8 of 8) pin no. pin name signal group
datasheet 77 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 5.6 intel ? pentium ? iii processor core pad to substrate via assignments these test points are the closest locations to the processor core die pad and should be used to validate processor core timings and signal quality on the back of the s.e.c.c. or the s.e.c.c.2 package. please see the secc disassembly process application note for the instructions on removing the cover of the secc package. 5.6.1 processor core pad via assignments (cpuid 067xh) figure 47 shows the via locations on the back of the processor substrate. 5.6.2 processor core signal assignments (cpuid 067xh) table 36 and table 37 shows the signal to via and the via to signal assignments, respectively. figure 47. processor core pad via assignments 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 a b c d e f g h i j k l m n o p q r s t u v w x y proc_core_pad_vias
78 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz table 36. via listing in order by signal name (sheet 1 of 10) signal name via locations a3# s18 a4# w18 a5# t18 a6# u18 a7# y19 a8# w19 a9# v18 a10# v19 a11# w20 a12# x20 a13# v20 a14# y20 a15# t21 a16# w21 a17# v21 a18# y21 a19# w23 a20# v24 a20m# p23 a21# v23 a22# t22 a23# u22 a24# t24 a25# s20 a26# s23 a27# t23 a28# u23 a29# r21 a30# s22 a31# s21 a32# r24 a33# q20 a34# r23 a35# q21 ads# x21 aerr# x13 ap0# s16 ap1# x15 bclk r6 berr# q23 bint# g17 bnr# s17 bp2# c16 bp3# g16 bpm0# b17 bpm1# e17 bpri# t15 br0# v14 br1# t16 bsel0 n23 bsel1 v2 d0# m21 d1# m22 d2# m19 d3# m24 d4# l23 d5# m20 d6# l20 d7# l19 d8# l22 d9# l21 d10# k23 d11# k20 d12# k24 d13# k19 d14# k25 d15# k22 d16# j24 d17# j25 d18# j21 d19# i22 d20# j23 d21# j22 d22# i23 d23# k21 d24# j20 table 36. via listing in order by signal name (sheet 2 of 10) signal name via locations
datasheet 79 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz d25# i24 d26# h23 d27# h22 d28# h20 d29# i21 d30# i19 d31# h24 d32# h21 d33# g24 d34# e25 d35# g23 d36# f23 d37# f21 d38# g25 d39# e24 d40# d25 d41# c24 d42# c23 d43# g22 d44# f24 d45# d23 d46# d22 d47# e23 d48# e22 d49# b22 d50# h19 d51# d21 d52# d24 d53# c21 d54# e21 d55# b20 d56# c19 d57# b21 d58# e19 d59# e20 d60# g19 d61# f19 d62# d20 table 36. via listing in order by signal name (sheet 3 of 10) signal name via locations d63# d19 dbsy# y14 defer# x17 dep0# h17 dep1# d18 dep2# c18 dep3# g18 dep4# e18 dep5# h18 dep6# b19 dep7# f18 drdy# y16 ferr# p25 flush# o19 hit# v13 hitm# w14 ierr# q25 ignne# o21 init# p22 lint[0] f15 lint[1] e14 lock# v15 picclk b16 picd[0] d16 picd[1] h16 prdy# d17 preq# e16 pwrgood n21 req0# u17 req1# y17 req2# s15 req3# w15 req4# w16 reset# p21 rp# s14 rs0# w13 rs1# s13 rs2# t13 table 36. via listing in order by signal name (sheet 4 of 10) signal name via locations
80 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz rsp# v16 slp# o22 smi# q24 stpclk# p24 tck o20 tdi o23 tdo n19 thermtrip# m23 thrmdn n24 thrmdp m25 tms o24 trdy# x18 trst# n20 v cc core a2 v cc core a4 v cc core b1 v cc core b2 v cc core b6 v cc core b9 v cc core b25 v cc core c14 v cc core d5 v cc core e1 v cc core e4 v cc core e6 v cc core e10 v cc core e12 v cc core f14 v cc core g3 v cc core g8 v cc core g10 v cc core g12 v cc core g14 v cc core h2 v cc core h8 v cc core h10 v cc core h25 v cc core i17 table 36. via listing in order by signal name (sheet 5 of 10) signal name via locations v cc core j1 v cc core j5 v cc core j8 v cc core j10 v cc core j12 v cc core j14 v cc core j16 v cc core k2 v cc core l8 v cc core l10 v cc core l12 v cc core l14 v cc core l16 v cc core m2 v cc core n2 v cc core n4 v cc core n6 v cc core n8 v cc core n10 v cc core n12 v cc core n16 v cc core p8 v cc core p10 v cc core p12 v cc core p14 v cc core p16 v cc core q22 v cc core r5 v cc core r7 v cc core r8 v cc core r10 v cc core r12 v cc core r14 v cc core r16 v cc core r18 v cc core s19 v cc core s24 v cc core t4 table 36. via listing in order by signal name (sheet 6 of 10) signal name via locations
datasheet 81 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz v cc core t5 v cc core t9 v cc core t12 v cc core t19 v cc core u2 v cc core u14 v cc core w1 v cc core w6 v cc core w9 v cc core w24 v cc core x2 v cc core x14 v cc core y22 v cc core y23 v ss x24 v ss u3 v ss u4 v ss a1 v ss a3 v ss b11 v ss b24 v ss c17 v ss c20 v ss c22 v ss c25 v ss d4 v ss d6 v ss f6 v ss f10 v ss f17 v ss f20 v ss f22 v ss f25 v ss g4 v ss i1 v ss i2 v ss i8 v ss i10 table 36. via listing in order by signal name (sheet 7 of 10) signal name via locations v ss i12 v ss i14 v ss i16 v ss i18 v ss i20 v ss j6 v ss j7 v ss j9 v ss j11 v ss j13 v ss j15 v ss j17 v ss j18 v ss k6 v ss k8 v ss k10 v ss k12 v ss k14 v ss k16 v ss k18 v ss l2 v ss l18 v ss l25 v ss m6 v ss m8 v ss m10 v ss m12 v ss m14 v ss m16 v ss m18 v ss n1 v ss n18 v ss o8 v ss o10 v ss o12 v ss o14 v ss o16 v ss p18 table 36. via listing in order by signal name (sheet 8 of 10) signal name via locations
82 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz v ss q8 v ss q10 v ss q12 v ss q14 v ss q16 v ss q18 v ss r4 v ss r9 v ss r11 v ss r13 v ss r15 v ss r17 v ss r19 v ss r22 v ss r25 v ss s3 v ss s4 table 36. via listing in order by signal name (sheet 9 of 10) signal name via locations v ss s5 v ss u13 v ss u16 v ss u19 v ss u20 v ss u21 v ss u24 v ss v22 v ss w17 v ss w22 v ss x1 v ss x7 v ss x16 v ss x19 v ss x22 v ss x23 table 36. via listing in order by signal name (sheet 10 of 10) signal name via locations
datasheet 83 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz table 37. via listing in order by via location (sheet 1 of 10) via locations signal name a1 v ss a2 v cc core a3 v ss a4 v cc core b1 v cc core b2 v cc core b6 v cc core b9 v cc core b11 v ss b16 picclk b17 bpm0# b19 dep6# b20 d55# b21 d57# b22 d49# b24 v ss b25 v cc core c14 v cc core c16 bp2# c17 v ss c18 dep2# c19 d56# c20 v ss c21 d53# c22 v ss c23 d42# c24 d41# c25 v ss d4 v ss d5 v cc core d6 v ss d16 picd[0] d17 prdy# d18 dep1# d19 d63# d20 d62# d21 d51# d22 d46# d23 d45# d24 d52# d25 d40# e1 v cc core e4 v cc core e6 v cc core e10 v cc core e12 v cc core e14 lint[1] e16 preq# e17 bpm1# e18 dep4# e19 d58# e20 d59# e21 d54# e22 d48# e23 d47# e24 d39# e25 d34# f6 v ss f10 v ss f14 v cc core f15 lint[0] f17 v ss f18 dep7# f19 d61# f20 v ss f21 d37# f22 v ss f23 d36# f24 d44# f25 v ss g3 v cc core g4 v ss g8 v cc core g10 v cc core g12 v cc core g14 v cc core table 37. via listing in order by via location (sheet 2 of 10) via locations signal name
84 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz g16 bp3# g17 bint# g18 dep3# g19 d60# g22 d43# g23 d35# g24 d33# g25 d38# h2 v cc core h8 v cc core h10 v cc core h16 picd[1] h17 dep0# h18 dep5# h19 d50# h20 d28# h21 d32# h22 d27# h23 d26# h24 d31# h25 v cc core i1 v ss i2 v ss i8 v ss i10 v ss i12 v ss i14 v ss i16 v ss i17 v cc core i18 v ss i19 d30# i20 v ss i21 d29# i22 d19# i23 d22# i24 d25# j1 v cc core j5 v cc core table 37. via listing in order by via location (sheet 3 of 10) via locations signal name j6 v ss j7 v ss j8 v cc core j9 v ss j10 v cc core j11 v ss j12 v cc core j13 v ss j14 v cc core j15 v ss j16 v cc core j17 v ss j18 v ss j20 d24# j21 d18# j22 d21# j23 d20# j24 d16# j25 d17# k2 v cc core k6 v ss k8 v ss k10 v ss k12 v ss k14 v ss k16 v ss k18 v ss k19 d13# k20 d11# k21 d23# k22 d15# k23 d10# k24 d12# k25 d14# l02 v ss l08 v cc core l10 v cc core l12 v cc core table 37. via listing in order by via location (sheet 4 of 10) via locations signal name
datasheet 85 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz l14 v cc core l16 v cc core l18 v ss l19 d7# l20 d6# l21 d9# l22 d8# l23 d4# l25 v ss m2 v cc core m6 v ss m8 v ss m10 v ss m12 v ss m14 v ss m16 v ss m18 v ss m19 d2# m20 d5# m21 d0# m22 d1# m23 thermtrip# m24 d3# m25 thrmdp n1 v ss n2 v cc core n4 v cc core n6 v cc core n8 v cc core n10 v cc core n12 v cc core n16 v cc core n18 v ss n19 tdo n20 trst# n21 pwrgood n23 bsel0 n24 thrmdn table 37. via listing in order by via location (sheet 5 of 10) via locations signal name o8 v ss o10 v ss o12 v ss o14 v ss o16 v ss o19 flush# o20 tck o21 ignne# o22 slp# o23 tdi o24 tms p8 v cc core p10 v cc core p12 v cc core p14 v cc core p16 v cc core p18 v ss p21 reset# p22 init# p23 a20m# p24 stpclk# p25 ferr# q8 v ss q10 v ss q12 v ss q14 v ss q16 v ss q18 v ss q20 a33# q21 a35# q22 v cc core q23 berr# q24 smi# q25 ierr# r4 v ss r5 v cc core r6 bclk r7 v cc core table 37. via listing in order by via location (sheet 6 of 10) via locations signal name
86 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz r8 v cc core r9 v ss r10 v cc core r11 v ss r12 v cc core r13 v ss r14 v cc core r15 v ss r16 v cc core r17 v ss r18 v cc core r19 v ss r21 a29# r22 v ss r23 a34# r24 a32# r25 v ss s3 v ss s4 v ss s5 v ss s13 rs1# s14 rp# s15 req2# s16 ap0# s17 bnr# s18 a3# s19 v cc core s20 a25# s21 a31# s22 a30# s23 a26# s24 v cc core t4 v cc core t5 v cc core t9 v cc core t12 v cc core t13 rs2# t15 bpri# table 37. via listing in order by via location (sheet 7 of 10) via locations signal name t16 br1# t18 a5# t19 v cc core t21 a15# t22 a22# t23 a27# t24 a24# u02 v cc core u03 v ss u04 v ss u13 v ss u14 v cc core u16 v ss u17 req0# u18 a6# u19 v ss u20 v ss u21 v ss u22 a23# u23 a28# u24 v ss v2 bsel1 v13 hit# v14 br0# v15 lock# v16 rsp# v18 a9# v19 a10# v20 a13# v21 a17# v22 v ss v23 a21# v24 a20# w1 v cc core w6 v cc core w9 v cc core w13 rs0# w14 hitm# table 37. via listing in order by via location (sheet 8 of 10) via locations signal name
datasheet 87 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz w15 req3# w16 req4# w17 v ss w18 a4# w19 a8# w20 a11# w21 a16# w22 v ss w23 a19# w24 v cc core x01 v ss x02 v cc core x07 v ss x13 aerr# x14 v cc core x15 ap1# x16 v ss table 37. via listing in order by via location (sheet 9 of 10) via locations signal name x17 defer# x18 trdy# x19 v ss x20 a12# x21 ads# x22 v ss x23 v ss x24 v ss y14 dbsy# y16 drdy# y17 req1# y19 a7# y20 a14# y21 a18# y22 v cc core y23 v cc core table 37. via listing in order by via location (sheet 10 of 10) via locations signal name
88 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 5.6.3 processor core pad via assignments (cpuid 068xh) figure 48 shows the via locations on the back of the processor substrate. figure 48. intel ? pentium ? iii processor s.e.c.c. 2 via map via2a
datasheet 89 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 6.0 boxed processor specifications 6.1 introduction the pentium iii processor is also offered as an intel boxed processor. intel boxed processors are intended for system integrators who build systems from baseboards and components. boxed pentium iii processors are supplied with an attached fan heatsink. this section documents baseboard and system requirements for the fan heatsink that will be supplied with the boxed pentium iii processor. this section is particularly important for original equipment manufacturers (oem's) that manufacture baseboards for system integrators. unless otherwise noted, all figures in this section are dimensioned in inches. figure 49 shows a mechanical representation of a boxed pentium iii processor in the s.e.c.c.2 package. boxed pentium iii processors are not available in the s.e.c.c. package. note: the airflow of the fan heatsink is into the center and out of the sides of the fan heatsink. 6.2 fan heatsink mechanical specifications this section documents the mechanical specifications of the boxed pentium iii processor fan heatsinks. baseboard manufacturers and system designers should take into account the spacial requirement for the boxed pentium iii processor in the s.e.c.c.2 package. 6.2.1 boxed processor fan heatsink dimensions the boxed processor is shipped with an attached fan heatsink. clearance is required around the fan heatsink to ensure unimpeded air flow for proper cooling. spacial requirements and dimensions for the boxed processor in s.e.c.c.2 package are shown in figure 50 (side view), figure 51 (front view), and figure 52 (top view). all dimensions are in inches. figure 49. boxed intel ? pentium ? iii processor in the s.e.c.c.2 packaging (fan power cable not shown) fan power connector fan fan shroud heatsink s.e.c.c. 2 cover
90 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz figure 50. side view space requirements for the boxed processor with s.e.c.c.2 packaging figure 51. front view space requirements for the boxed processor with s.e.c.c.2 packaging
datasheet 91 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 6.2.2 boxed processor fan heatsink weight the boxed processor fan heatsink will not weigh more than 225 grams. see section 4.0 and section 5.0 for details on the processor weight and heatsink requirements. 6.2.3 boxed processor retention mechanism the boxed processor requires processor retention mechanism(s) to secure the processor in the 242- contact slot connector. s.e.c.c.2 processors must use either retention mechanisms described in ap-826, mechanical assembly and customer manufacturing technology for s.e.p. packages (order number 243748) or universal retention mechanisms that accept s.e.c.c., s.e.p.p. and s.e.c.c.2 packaged processors. the boxed processor will not ship with a retention mechanism. baseboards designed for use by system integrators must include retention mechanisms that support the s.e.c.c.2 package and the appropriate installation instructions. baseboards designed to accept both pentium ii processors and pentium iii processors have component height restrictions for passive heatsink support designs, as described in ap-588, mechanical and assembly technology for s.e.c. cartridge processors (order number 243333). figure 52. top view air space requirements for the boxed processor table 38. boxed processor fan heatsink spatial dimensions fig. ref. label refers to figure dimensions (inches) min typ max a 50 s.e.c.c.2 fan heatsink depth (off processor substrate) 1.48 b 50 s.e.c.c.2 fan heatsink height above baseboard 0.4 c 51 s.e.c.c.2 fan heatsink height 2.2 d 51 s.e.c.c.2 fan heatsink width (plastic shroud only) 4.9 e 51 s.e.c.c.2 power cable connector location from edge of fan heatsink shroud 1.4 1.45 f 52 airflow keep out zones from end of fan heatsink 0.40 g 52 airflow keepout zones from face of fan heatsink 0.20
92 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 6.3 fan heatsink electrical requirements 6.3.1 fan heatsink power supply the boxed processor's fan heatsink requires a +12 v power supply. a fan power cable will be shipped with the boxed processor to draw power from a power header on the baseboard. the power cable connector and pinout are shown in figure 53 . baseboards must provide a matched power header to support the boxed processor. table 39 contains specifications for the input and output signals at the fan heatsink connector. the cable length will be 7.0 0.25 inches. the fan heatsink outputs a sense signal, which is an open-collector output, that pulses at a rate of two pulses per fan revolution. a baseboard pull-up resistor (~12 k w ) provides v oh to match the baseboard- mounted fan speed monitor requirements, if applicable. use of the sense signal is optional. if the sense signal is not used, pin 3 of the connector should be tied to gnd. the power header on the baseboard must be positioned to allow the fan heatsink power cable to reach it. the power header identification and location should be documented in the baseboard documentation, or on the baseboard itself. figure 53 shows the location of the fan power connector relative to the 242-contact slot connector. the baseboard power header should be positioned within 4.75 inches (lateral) of the fan power connector. figure 53. boxed processor fan heatsink power cable connector description table 39. fan heatsink power and signal specifications description min typ max +12 v: 12 volt fan power supply 9 v 12 v 13.8 v i c : fan current draw 100 ma ics: fan sense signal current 10 ma sense: sense frequency (baseboard should pull this pin up to appropriate v cc with resistor) 2 pulses per fan revolution pin signal straight square pin, 3-pin terminal housing with polarizing ribs and friction locking ramp. 0.100" pin pitch, 0.025" square pin width. waldom/molex p/n 22-01-3037 or equivalent. match with straight pin, friction lock header on motherboard waldom/molex p/n 22-23-2031, amp p/n 640456-3, or equivalent. 1 2 3 gnd +12v sense 12 3
datasheet 93 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 6.4 fan heatsink thermal specifications this section describes the cooling requirements of the fan heatsink solution utilized by the boxed processor. 6.4.1 boxed processor cooling requirements the boxed processor will be directly cooled with a fan heatsink. however, meeting the processor's temperature specification is also function of the thermal design of the entire system, and ultimately the responsibility of the system integrator. refer to section 4.0 for processor temperature specifications. the boxed processor fan heatsink is able to keep the processor temperature within the specifications (see table 25 and table 26 ) in chassis that provide good thermal management. for the boxed processor fan heatsink to operate properly, it is critical that the airflow provided to the fan heatsink is unimpeded. airspace is required around the fan to ensure that the airflow through the fan heatsink is not blocked. blocking the airflow to the fan heatsink reduces the cooling efficiency and decreases fan life. figure 52 illustrates an acceptable airspace clearance for the fan heatsink. it is also recommended that the air temperature entering the fan be kept below 45 c (see figure 52 for measurement location). again, meeting the processor's temperature specification is the responsibility of the system integrator. refer to section 4.0 for processor temperature specifications. figure 54. recommended baseboard power header placement relative to fan power connector and intel ? pentium ? iii processor table 40. baseboard fan power connector location fig. ref. labels dimensions (inches) min typ max v approximate perpendicular distance of the fan power connector from the center of the 242-contact slot connector 1.44 w approximate parallel distance of the fan power connector from the edge of the 242-contact slot connector 1.45 x lateral distance of the baseboard fan power header location from the fan power connector 4.75 242-contact slot connector w v fan power connector location (1.56 inches above motherboard motherboard fan power header should be positioned within 4.75 inches of the fan power connector (lateral distance). x
94 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 7.0 intel ? pentium ? iii processor signal description this section provides an alphabetical listing of all intel ? pentium ? iii processor signals. the tables at the end of this section summarize the signals by direction: output, input, and i/o. 7.1 alphabetical signals reference table 41. signal description (sheet 1 of 7) name type description a[35:3]# i/o the a[35:3]# (address) signals define a 2 36 -byte physical memory address space. when ads# is active, these pins transmit the address of a transaction; when ads# is inactive, these pins transmit transaction type information. these signals must connect the appropriate pins of all agents on the processor system bus. the a[35:24]# signals are parity-protected by the ap1# parity signal, and the a[23:3]# signals are parity-protected by the ap0# parity signal. on the active-to-inactive transition of reset#, the processors sample the a[35:3]# pins to determine their power-on configuration. see the pentium ? ii processor developers manual (order number 243502) for details. a20m# i if the a20m# (address-20 mask) input signal is asserted, the processor masks physical address bit 20 (a20#) before looking up a line in any internal cache and before driving a read/write transaction on the bus. asserting a20m# emulates the 8086 processor's address wrap-around at the 1-mbyte boundary. assertion of a20m# is only supported in real mode. a20m# is an asynchronous signal. however, to ensure recognition of this signal following an i/o write instruction, it must be valid along with the trdy# assertion of the corresponding i/o write bus transaction. ads# i/o the ads# (address strobe) signal is asserted to indicate the validity of the transaction address on the a[35:3]# pins. all bus agents observe the ads# activation to begin parity checking, protocol checking, address decode, internal snoop, or deferred reply id match operations associated with the new transaction. this signal must connect the appropriate pins on all processor system bus agents. aerr# i/o the aerr# (address parity error) signal is observed and driven by all processor system bus agents, and if used, must connect the appropriate pins on all processor system bus agents. aerr# observation is optionally enabled during power-on configuration; if enabled, a valid assertion of aerr# aborts the current transaction. if aerr# observation is disabled during power-on configuration, a central agent may handle an assertion of aerr# as appropriate to the error handling architecture of the system. ap[1:0]# i/o the ap[1:0]# (address parity) signals are driven by the request initiator along with ads#, a[35:3]#, req[4:0]#, and rp#. ap1# covers a[35:24]#, and ap0# covers a[23:3]#. a correct parity signal is high if an even number of covered signals are low and low if an odd number of covered signals are low. this allows parity to be high when all the covered signals are high. ap[1:0]# should connect the appropriate pins of all processor system bus agents. bclk i the bclk (bus clock) signal determines the bus frequency. all processor system bus agents must receive this signal to drive their outputs and latch their inputs on the bclk rising edge. all external timing parameters are specified with respect to the bclk signal.
datasheet 95 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz berr# i/o the berr# (bus error) signal is asserted to indicate an unrecoverable error without a bus protocol violation. it may be driven by all processor system bus agents, and must connect the appropriate pins of all such agents, if used. however, pentium ? iii processors do not observe assertions of the berr# signal. berr# assertion conditions are configurable at a system level. assertion options are defined by the following options: ? enabled or disabled. ? asserted optionally for internal errors along with ierr#. ? asserted optionally by the request initiator of a bus transaction after it observes an error. ? asserted by any bus agent when it observes an error in a bus transaction. binit# i/o the binit# (bus initialization) signal may be observed and driven by all processor system bus agents, and if used must connect the appropriate pins of all such agents. if the binit# driver is enabled during power on configuration, binit# is asserted to signal any bus condition that prevents reliable future information. if binit# observation is enabled during power-on configuration, and binit# is sampled asserted, all bus state machines are reset and any data which was in transit is lost. all agents reset their rotating id for bus arbitration to the state after reset, and internal count information is lost. the l1 and l2 caches are not affected. if binit# observation is disabled during power-on configuration, a central agent may handle an assertion of binit# as appropriate to the error handling architecture of the system. bnr# i/o the bnr# (block next request) signal is used to assert a bus stall by any bus agent who is unable to accept new bus transactions. during a bus stall, the current bus owner cannot issue any new transactions. since multiple agents might need to request a bus stall at the same time, bnr# is a wire-or signal which must connect the appropriate pins of all processor system bus agents. in order to avoid wire-or glitches associated with simultaneous edge transitions driven by multiple drivers, bnr# is activated on specific clock edges and sampled on specific clock edges. bp[3:2]# i/o the bp[3:2]# (breakpoint) signals are outputs from the processor that indicate the status of breakpoints. bpm[1:0]# i/o the bpm[1:0]# (breakpoint monitor) signals are breakpoint and performance monitor signals. they are outputs from the processor which indicate the status of breakpoints and programmable counters used for monitoring processor performance. bpri# i the bpri# (bus priority request) signal is used to arbitrate for ownership of the processor system bus. it must connect the appropriate pins of all processor system bus agents. observing bpri# active (as asserted by the priority agent) causes all other agents to stop issuing new requests, unless such requests are part of an ongoing locked operation. the priority agent keeps bpri# asserted until all of its requests are completed, then releases the bus by deasserting bpri#. table 41. signal description (sheet 2 of 7) name type description
96 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz br0# br1# i/o i the br0# and br1# (bus request) pins drive the breq[1:0]# signals in the system. the breq[1:0]# signals are interconnected in a rotating manner to individual processor pins. the table below gives the rotating interconnect between the processor and bus signals. bsel[1:0] i/o these signals are used to select the system bus frequency. a bsel[1:0] = 01 will select a 100 mhz system bus and a bsel[1:0] = 11 will select a 133 mhz system bus frequency. the frequency is determined by the processor(s), chipset, and frequency synthesizer capabilities. all system bus agents must operate at the same frequency. the pentium iii processor operates at 100 mhz and 133 mhz system bus frequencies. individual processors will only operate at their specified system bus frequency. either 100 mhz or 133 mhz, not both. on motherboards which support operation at either 66 mhz or 100 mhz, a bsel[1:0] = x0 will select a 66 mhz system bus frequency. these signals must be pulled up to 3.3v with 1k w resistors and provided as frequency selection signal to the clock driver/synthesizer. if the system motherboard is not capable of operating at 133 mhz, it should ground the bsel1 signal and generate a 100 mhz system bus frequency. see section 2.8.2 for implementation details. d[63:0]# i/o the d[63:0]# (data) signals are the data signals. these signals provide a 64-bit data path between the processor system bus agents, and must connect the appropriate pins on all such agents. the data driver asserts drdy# to indicate a valid data transfer. dbsy# i/o the dbsy# (data bus busy) signal is asserted by the agent responsible for driving data on the processor system bus to indicate that the data bus is in use. the data bus is released after dbsy# is deasserted. this signal must connect the appropriate pins on all processor system bus agents. defer# i the defer# signal is asserted by an agent to indicate that a transaction cannot be guaranteed in-order completion. assertion of defer# is normally the responsibility of the addressed memory or i/o agent. this signal must connect the appropriate pins of all processor system bus agents. dep[7:0]# i/o the dep[7:0]# (data bus ecc protection) signals provide optional ecc protection for the data bus. they are driven by the agent responsible for driving d[63:0]#, and must connect the appropriate pins of all processor system bus agents which use them. the dep[7:0]# signals are enabled or disabled for ecc protection during power on configuration. drdy# i/o the drdy# (data ready) signal is asserted by the data driver on each data transfer, indicating valid data on the data bus. in a multi-cycle data transfer, drdy# may be deasserted to insert idle clocks. this signal must connect the appropriate pins of all processor system bus agents. table 41. signal description (sheet 3 of 7) name type description during power-up configuration, the central agent must assert the br0# bus signal. all symmetric agents sample their br[1:0]# pins on active-to-inactive transition of reset#. the pin on which the agent samples an active level determines its symmetric agent id. all agents then configure their pins to match the appropriate bu signal protocol, as shown below. br0# (i/o) and br1# signals rotating interconnect bus signal agent 0 pins agent 1 pins breq0# br0# br1# breq1# br1# br0# br[1:0]# signal agent ids pin sampled active in reset# agent id br0# 0 br1# 1
datasheet 97 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz emi i emi pins should be connected to baseboard ground and/or to chassis ground through zero ohm (0 w ) resistors. the zero ohm resistors should be placed in close proximity to the processor connector. the path to chassis ground should be short in length and have a low impedance. these pins are used for emi management purposes. ferr# o the ferr# (floating-point error) signal is asserted when the processor detects an unmasked floating-point error. ferr# is similar to the error# signal on the intel 387 coprocessor, and is included for compatibility with systems using ms- dos*-type floating-point error reporting. flush# i when the flush# input signal is asserted, processors write back all data in the modified state from their internal caches and invalidate all internal cache lines. at the completion of this operation, the processor issues a flush acknowledge transaction. the processor does not cache any new data while the flush# signal remains asserted. flush# is an asynchronous signal. however, to ensure recognition of this signal following an i/o write instruction, it must be valid along with the trdy# assertion of the corresponding i/o write bus transaction. on the active-to-inactive transition of reset#, each processor samples flush# to determine its power-on configuration. see the p6 family of processors hardware developers manual (order number 244001) for details. hit# hitm# i/o i/o the hit# (snoop hit) and hitm# (hit modified) signals convey transaction snoop operation results, and must connect the appropriate pins of all processor system bus agents. any such agent may assert both hit# and hitm# together to indicate that it requires a snoop stall, which can be continued by reasserting hit# and hitm# together. ierr# o the ierr# (internal error) signal is asserted by a processor as the result of an internal error. assertion of ierr# is usually accompanied by a shutdown transaction on the processor system bus. this transaction may optionally be converted to an external error signal (e.g., nmi) by system core logic. the processor will keep ierr# asserted until the assertion of reset#, binit#, or init#. ignne# i the ignne# (ignore numeric error) signal is asserted to force the processor to ignore a numeric error and continue to execute noncontrol floating-point instructions. if ignne# is deasserted, the processor generates an exception on a noncontrol floating-point instruction if a previous floating-point instruction caused an error. ignne# has no effect when the ne bit in control register 0 is set. ignne# is an asynchronous signal. however, to ensure recognition of this signal following an i/o write instruction, it must be valid along with the trdy# assertion of the corresponding i/o write bus transaction. init# i the init# (initialization) signal, when asserted, resets integer registers inside all processors without affecting their internal (l1 or l2) caches or floating-point registers. each processor then begins execution at the power-on reset vector configured during power-on configuration. the processor continues to handle snoop requests during init# assertion. init# is an asynchronous signal and must connect the appropriate pins of all processor system bus agents. if init# is sampled active on the active to inactive transition of reset#, then the processor executes its built-in self-test (bist). lint[1:0] i the lint[1:0] (local apic interrupt) signals must connect the appropriate pins of all apic bus agents, including all processors and the core logic or i/o apic component. when the apic is disabled, the lint0 signal becomes intr, a maskable interrupt request signal, and lint1 becomes nmi, a nonmaskable interrupt. intr and nmi are backward compatible with the signals of those names on the pentium processor. both signals are asynchronous. both of these signals must be software configured via bios programming of the apic register space to be used either as nmi/intr or lint[1:0]. because the apic is enabled by default after reset, operation of these pins as lint[1:0] is the default configuration. table 41. signal description (sheet 4 of 7) name type description
98 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz lock# i/o the lock# signal indicates to the system that a transaction must occur atomically. this signal must connect the appropriate pins of all processor system bus agents. for a locked sequence of transactions, lock# is asserted from the beginning of the first transaction end of the last transaction. when the priority agent asserts bpri# to arbitrate for ownership of the processor system bus, it will wait until it observes lock# deasserted. this enables symmetric agents to retain ownership of the processor system bus throughout the bus locked operation and ensure the atomicity of lock. picclk i the picclk (apic clock) signal is an input clock to the processor and core logic or i/o apic which is required for operation of all processors, core logic, and i/o apic components on the apic bus. picd[1:0] i/o the picd[1:0] (apic data) signals are used for bidirectional serial message passing on the apic bus, and must connect the appropriate pins of all processors and core logic or i/o apic components on the apic bus. prdy# o the prdy (probe ready) signal is a processor output used by debug tools to determine processor debug readiness. preq# i the preq# (probe request) signal is used by debug tools to request debug operation of the processors. pwrgood i the pwrgood (power good) signal is a 2.5 v tolerant processor input. the processor requires this signal to be a clean indication that the clocks and power supplies (v cc core , etc.) are stable and within their specifications. clean implies that the signal will remain low (capable of sinking leakage current), without glitches, from the time that the power supplies are turned on until they come within specification. the signal must then transition monotonically to a high (2.5 v) state. the figure below illustrates the relationship of pwrgood to other system signals. pwrgood can be driven inactive at any time, but clocks and power must again be stable before a subsequent rising edge of pwrgood. it must also meet the minimum pulse width specification in table 15 , and be followed by a 1 ms reset# pulse. the pwrgood signal must be supplied to the processor; it is used to protect internal circuits against voltage sequencing issues. it should be driven high throughout boundary scan operation. pwrgood relationship at power-on req[4:0]# i/o the req[4:0]# (request command) signals must connect the appropriate pins of all processor system bus agents. they are asserted by the current bus owner over two clock cycles to define the currently active transaction type. table 41. signal description (sheet 5 of 7) name type description bclk pwrgood reset# d0026-00 1 msec v ih,min v cc , v ccp , v ref
datasheet 99 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz reset# i asserting the reset# signal resets all processors to known states and invalidates their l1 and l2 caches without writing back any of their contents. reset# must remain active for one microsecond for a warm reset; for a power-on reset, reset# must stay active for at least one millisecond after v cc core and clk have reached their proper specifications. on observing active reset#, all processor system bus agents will deassert their outputs within two clocks. a number of bus signals are sampled at the active-to-inactive transition of reset# for power-on configuration. these configuration options are described in the p6 family of processors hardware developers manual (order number 244001) for details. the processor may have its outputs tristated via power-on configuration. otherwise, if init# is sampled active during the active-to-inactive transition of reset#, the processor will execute its built-in self-test (bist). whether or not bist is executed, the processor will begin program execution at the power on reset vector (default 0_ffff_fff0h). reset# must connect the appropriate pins of all processor system bus agents. rp# i/o the rp# (request parity) signal is driven by the request initiator, and provides parity protection on ads# and req[4:0]#. it must connect the appropriate pins of all processor system bus agents. a correct parity signal is high if an even number of covered signals are low and low if an odd number of covered signals are low. this definition allows parity to be high when all covered signals are high. rs[2:0]# i the rs[2:0]# (response status) signals are driven by the response agent (the agent responsible for completion of the current transaction), and must connect the appropriate pins of all processor system bus agents. rsp# i the rsp# (response parity) signal is driven by the response agent (the agent responsible for completion of the current transaction) during assertion of rs[2:0]#, the signals for which rsp# provides parity protection. it must connect the appropriate pins of all processor system bus agents. a correct parity signal is high if an even number of covered signals are low and low if an odd number of covered signals are low. while rs[2:0]# = 000, rsp# is also high, since this indicates it is not being driven by any agent guaranteeing correct parity. slotocc# o the slotocc# signal is defined to allow a system design to detect the presence of a terminator card or processor in a sc242 connector. combined with the vid combination of vid[4:0]= 11111 (see section 2.6 ), a system can determine if a sc242 connector is occupied, and whether a processor core is present. see the table below for states and values for determining the type of cartridge in the sc242 connector. table 41. signal description (sheet 6 of 7) name type description sc242 occupation truth table signal value status slotocc# vid[4:0] 0 anything other than 11111 processor with core in sc242 connector. slotocc# vid[4:0] 0 11111 terminator cartridge in sc242 connector (i.e., no core present). slotocc# vid[4:0] 1 any value sc242 connector not occupied.
100 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz slp# i the slp# (sleep) signal, when asserted in stop-grant state, causes processors to enter the sleep state. during sleep state, the processor stops providing internal clock signals to all units, leaving only the phase-locked loop (pll) still operating. processors in this state will not recognize snoops or interrupts. the processor will recognize only assertions of the slp#, stpclk#, and reset# signals while in sleep state. if slp# is deasserted, the processor exits sleep state and returns to stop-grant state, restarting its internal clock signals to the bus and apic processor core units. smi# i the smi# (system management interrupt) signal is asserted asynchronously by system logic. on accepting a system management interrupt, processors save the current state and enter system management mode (smm). an smi acknowledge transaction is issued, and the processor begins program execution from the smm handler. stpclk# i the stpclk# (stop clock) signal, when asserted, causes processors to enter a low power stop-grant state. the processor issues a stop-grant acknowledge transaction, and stops providing internal clock signals to all processor core units except the bus and apic units. the processor continues to snoop bus transactions and service interrupts while in stop-grant state. when stpclk# is deasserted, the processor restarts its internal clock to all units and resumes execution. the assertion of stpclk# has no effect on the bus clock; stpclk# is an asynchronous input. tck i the tck (test clock) signal provides the clock input for the processor test bus (also known as the test access port). tdi i the tdi (test data in) signal transfers serial test data into the processor. tdi provides the serial input needed for jtag specification support. tdo o the tdo (test data out) signal transfers serial test data out of the processor. tdo provides the serial output needed for jtag specification support. testhi i the testhi signal must be connected to a 2.5 v power source through a 1-100 k w resistor for proper processor operation. thermdn o thermal diode cathode. used to calculate core temperature. see section 4.1 . thermdp i thermal diode anode. used to calculate core temperature. see section 4.1 . thermtrip# o the processor protects itself from catastrophic overheating by use of an internal thermal sensor. this sensor is set well above the normal operating temperature to ensure that there are no false trips. the processor will stop all execution when the junction temperature exceeds approximately 135 c. this is signaled to the system by the thermtrip# (thermal trip) pin. once activated, the signal remains latched, and the processor stopped, until reset# goes active. there is no hysteresis built into the thermal sensor itself; as long as the die temperature drops below the trip level, a reset# pulse will reset the processor and execution will continue. if the temperature has not dropped below the trip level, the processor will continue to drive thermtrip# and remain stopped. tms i the tms (test mode select) signal is a jtag specification support signal used by debug tools. trdy# i the trdy# (target ready) signal is asserted by the target to indicate that it is ready to receive a write or implicit writeback data transfer. trdy# must connect the appropriate pins of all processor system bus agents. trst# i the trst# (test reset) signal resets the test access port (tap) logic. trst# must be driven low during power on reset. this can be done with a 680 ohm pull- down resistor. vid[4:0] o the vid[4:0] (voltage id) pins can be used to support automatic selection of power supply voltages. these pins are not signals, but are either an open circuit or a short circuit to v ss on the processor. the combination of opens and shorts defines the voltage required by the processor. the vid pins are needed to cleanly support voltage specification variations on processors. see table 3 for definitions of these pins. the power supply must supply the voltage that is requested by these pins, or disable itself. table 41. signal description (sheet 7 of 7) name type description
datasheet 101 pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz 7.2 signal summaries table 42 through table 45 list attributes of the processor output, input, and i/o signals. note: 1. synchronous assertion with active tdry# ensures synchronization. table 42. output signals name active level clock signal group ferr# low asynch cmos output ierr# low asynch cmos output prdy# low bclk agtl+ output slotocc# low asynch power/other tdo high tck tap output thermtrip# low asynch cmos output vid[4:0] high asynch power/other table 43. input signals name active level clock signal group qualified a20m# low asynch cmos input always 1 bpri# low bclk agtl+ input always br1# low bclk agtl+ input always bclk high system bus clock always defer# low bclk agtl+ input always flush# low asynch cmos input always 1 ignne# low asynch cmos input always 1 init# low asynch cmos input always 1 intr high asynch cmos input apic disabled mode lint[1:0] high asynch cmos input apic enabled mode nmi high asynch cmos input apic disabled mode picclk high apic clock always preq# low asynch cmos input always pwrgood high asynch cmos input always reset# low bclk agtl+ input always rs[2:0]# low bclk agtl+ input always rsp# low bclk agtl+ input always slp# low asynch cmos input during stop-grant state smi# low asynch cmos input stpclk# low asynch cmos input tck high tap input tdi high tck tap input testhi high asynch power/other always tms high tck tap input trst# low asynch tap input trdy# low bclk agtl+ input
102 datasheet pentium ? iii processor for the sc242 at 450 mhz to 1.0 ghz end of datasheet. table 44. input/output signals (single driver) name active level clock signal group qualified bsel[1:0] high asynch power/other always a[35:3]# low bclk agtl+ i/o ads#, ads#+1 ads# low bclk agtl+ i/o always ap[1:0]# low bclk agtl+ i/o ads#, ads#+1 br0# low bclk agtl+ i/o always bp[3:2]# low bclk agtl+ i/o always bpm[1:0]# low bclk agtl+ i/o always d[63:0]# low bclk agtl+ i/o drdy# dbsy# low bclk agtl+ i/o always dep[7:0]# low bclk agtl+ i/o drdy# drdy# low bclk agtl+ i/o always lock# low bclk agtl+ i/o always req[4:0]# low bclk agtl+ i/o ads#, ads#+1 rp# low bclk agtl+ i/o ads#, ads#+1 table 45. input/output signals (multiple driver) name active level clock signal group qualified aerr# low bclk agtl+ i/o ads#+3 berr# low bclk agtl+ i/o always bnr# low bclk agtl+ i/o always binit# low bclk agtl+ i/o always hit# low bclk agtl+ i/o always hitm# low bclk agtl+ i/o always picd[1:0] high picclk apic i/o always

▲Up To Search▲

Price & Availability of PENTIUMIIICPU

	To Download PENTIUMIIICPU Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .